grinnergetter
Well-Known Member
I have finally got around to working on my Allen 338 edge. My starting loads were 88 gns. of H1000 and I have pushed it to 91 gns. and am now getting ejector marks.
The most I can get out of this rifle is 2560 fps. This is out of a 28 inch Lilja barrel.
91 gns. H1000
Remington brass
Fed 215 primer
300 SMK's
15 thou off the lands
OAL 3.760
I think this seems a bit slow and am wondering if I should just leave it alone or try a new powder. Powder is from 2 years ago.
Also, I am also sure this subject has been beaten to death but everyone else's seems to be faster than mine.
I would appreciate your input, Grin
The most I can get out of this rifle is 2560 fps. This is out of a 28 inch Lilja barrel.
91 gns. H1000
Remington brass
Fed 215 primer
300 SMK's
15 thou off the lands
OAL 3.760
I think this seems a bit slow and am wondering if I should just leave it alone or try a new powder. Powder is from 2 years ago.
Also, I am also sure this subject has been beaten to death but everyone else's seems to be faster than mine.
I would appreciate your input, Grin