Wild Monkey
Well-Known Member
- Joined
- Oct 16, 2017
- Messages
- 424
@ 3.9" Long OAL the 7mm PRC would be a Monster and way too long. The 7-KAM is perfect IMO and if you think it's under-bore Then you need the 7-300 Blaser (7-SMX).
Last edited:
@ 3.9" Long OAL the 7mm PRC would be a Monster and way too long. The 7-KAM is perfect IMO and if you think it's under-bore Then you need the 7-300 Blaser.
I've never used much Hornady brass before, but how does their new stuff hold up? Specifically, how does the PRC last and perform? Thanks
That's smack dab in the middle of "7-KAM" dimensions. Only it's longer, might as well just neck down the 300-PRC Brass, it would be way easier. These Case capacities are already available in more popular Cartridges starting from the 7-300 Win Mag, and working our way down to 7x61 with all the short mags in between. It's only when we get down to the "7-6.5 PRC" (7mm-07) we regain our Sanity. "7-300 RCM-MX" / Then we are back to 7-SAUM vs 7-WSM in the short Action.
("Kamikazi" whacks brass off at Base of Neck using: 300 PRC or 6.5X68s or 8x68 Brass. Philosophy is not have a large build up of brass from moving Base of Neck Down. Now pondering the same in 300-RUM brass called "SMX") Just Whack It Off!! Suddenly the 300 Blaser and 7mm Blaser Dimensions pop up as the 300 is Whacked off at the base of the Neck and the 7 is Whacked off at the Shoulder.
@ 3.9" Long OAL the 7mm PRC would be a Monster and way too long. The 7-KAM is perfect IMO and if you think it's under-bore Then you need the 7-300 Blaser (7-SMX).
jpndave,
"7-KAM" is short for KAMIKAZI!!! My best Design yet. 300-SMX is essentially an Improved 300-Blaser or 30-338 Nosler. So which is it? Too expensive? Too Overbore? Too Rare? Not Pretty enough? Go on.. Where does it end?
How do you reload something that has the worst brass in the industry ? Or is this discussion all of factory ammo? 28 Nosler - ADG brass, 7-300 NM Lapua and Peterson brass, 7-300 win- unlimited brass, the list goes on. What are the true long range custom reloaders going to do? Wait 2 years for a comparable brass company to hopefully start making it? Velocity is not almost any different than a 7-300 win? Sweet spot on 195's is 28 Nos on the button at 3050-3080 right ?
THAT's just not RIGHT....LOL
I believe that meme came up once already....Isnt that plagiarism?
Yes it is but I don't believe he would mind us borrowing it! LolI believe that meme came up once already....Isnt that plagiarism?
I'll allow it! LOLYes it is but I don't believe he would mind us borrowing it! Lol
BINGO!!!!Almost sounds like a 7 lrm...