Hudge76

Do you know where they are building powder plant at, Des Arc, or some place else?

I have some WRE primers that I got a couple weeks at Sportsman’s in Anchorage. I’ve only tried the LRP ones, as the magnums were out...

This would be the route I would go. I have rifles in .270 WSM and 6.8 Western. The better bang for the buck is more free bore and a...

There is no "should have" ;) Glad the banter sparked thought. Here is an additional idea if you reload. With a new barrel, you can get...

I’ve played around with seating depth mainly on my 6 ARC and 6.5 Grendel gas guns. Honestly, I did not get vastly different t results so...

The moral of this story is that it all depends on the elevation they're shot at. That has to be included in any conversation about twist...

I I’ve played around with heavy for caliber bullets in my .270 and .270 WSM. Once I hit 165 gr. on up, I get keyholes. Your elevation...

I am almost positive the 7 SAUM is .550”. At least that’s what I see on the SAAMI chart.

I too have the same rifle and it likes a heavy dose or Superformance and 143 ELD-X’s. I plan on trying 130 gr CX’s soon in it.

I have a .270 WSM and 6.8 Western. I’m still fire forming 7 SAUM brass so I can reload for the 6.8 Western. I’ve tested 165 gr ABLR’s in...

Personally, I don’t think any factory ammunition lives up to its full potential unless it’s loaded to a particular rifle

Primers are definitely flat. You’re very close to pressure signs, as long as you worked this load up during the warm temperatures it...