What can the 338 win mag do that the 300 RUM cant?

Southernfryedyankee

Well-Known Member
Joined
Feb 8, 2009
Messages
433
Location
SC
Since I am getting into rebarreling for my savage I might start looking at different calibers. Since I am keeping my mighty 7mag I would also like a larger caliber for future long range shooting/hunting. I am toying with the idea of what my next caliber should be.
 
Instead getting 338RUM get a 338edge . More case capacity (7%) then a 338 rum. The accuracy is

UNBELIEVABLE . This 338Edge is great rifle, easy and affordable to reload, and after you get one, you will never go back.
 
Instead getting 338RUM get a 338edge . More case capacity (7%) then a 338 rum. The accuracy is

UNBELIEVABLE . This 338Edge is great rifle, easy and affordable to reload, and after you get one, you will never go back.

I dont reload though, I wish I did. I am JUST getting into basic gunsmithing. I dont think I am anywhere near reloading yet. I have heard amazing things about the edge and watched many a youtube videos on it.
 
I dont reload though, I wish I did. I am JUST getting into basic gunsmithing. I dont think I am anywhere near reloading yet. I have heard amazing things about the edge and watched many a youtube videos on it.

There is a way you can have your cake and eat it to.

If you like the edge but want to stay with something factory then get an extended
mag box and you can make up the difference between the 338 RUM and the 338
edge in powder capacity by seating the bullets longer and not encroaching as much
in the case using up powder space.

Of corse if you do this with the 300/338 you can boost powder capacity in it also.

When I built mine I used a Weatherby MK 5 action because it was .100 thousandth
longer. ( The difference in the case body length of a 338 RUM and the 300/338 is
about .090 thousandth.

The 338 RUM delivers 25% more muzzel energy than the 338 Win Mag and that should
be enough for anything on this continent.

Mine will produce 3100 ft/sec with a 250 gr Noz Accubond in a 27" barrel.(stiff but not Max).

I'm not sure what the 300/338 will do in this length barrel but it can't be much more because
this almost matches the 338/378 and it has 12 to 14grs more capacity than the 300/338.

Just an opinion
J E CUSTOM
 
There is a way you can have your cake and eat it to.

If you like the edge but want to stay with something factory then get an extended
mag box and you can make up the difference between the 338 RUM and the 338
edge in powder capacity by seating the bullets longer and not encroaching as much
in the case using up powder space.

Of corse if you do this with the 300/338 you can boost powder capacity in it also.

When I built mine I used a Weatherby MK 5 action because it was .100 thousandth
longer. ( The difference in the case body length of a 338 RUM and the 300/338 is
about .090 thousandth.

The 338 RUM delivers 25% more muzzel energy than the 338 Win Mag and that should
be enough for anything on this continent.

Mine will produce 3100 ft/sec with a 250 gr Noz Accubond in a 27" barrel.(stiff but not Max).

I'm not sure what the 300/338 will do in this length barrel but it can't be much more because
this almost matches the 338/378 and it has 12 to 14grs more capacity than the 300/338.

Just an opinion
J E CUSTOM

He doesn't reload. Where is he going to get factory ammo that's loaded that way? I understand and agree with the premise but I think you missed the "I don't reload" part.
 
For a non-reloader the 338 Lapua is the obvious choice since there are match grade factory ammo available loaded with the 250 & 300 grain SMK
 
Last edited:
He doesn't reload. Where is he going to get factory ammo that's loaded that way? I understand and agree with the premise but I think you missed the "I don't reload" part.

Thanks KRP but I did not miss the part about reloading just pointing out that if
he started with a 338 RUM he could move up later when he does start reloading
to the longer mag or action with out a re chamber.

Guess I was not clear about that.

I feel like he will start reloading once he starts shooting the 338 because of cost
and better accuracy with reloads.

J E CUSTOM

Thanks
 
I used to have a 300RUM and the cost of ammo drove me to start reloading. Take a look at most of the ammo for those rifles and you're easily talking over $1 every time you pull the trigger. In most cases it'll be $2-$3 every time you pull the trigger in those calibers with factory ammo.
 
If you are wanting to start doing some gunsmithing, then consider reloading as part of the gunsmithing process. Basic reloading is quite simple and the initial investment is not a lot of money. Oh and my vote goes to the 338 rum or do both like I do!
 
Warning! This thread is more than 16 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top