QuietTexan

In a word, inconsistency. More differences between cases in the same lot, more thickness variations, etc. It can be made to work, but...

Took your advice and purchased some ADG brass this afternoon.

Peterson makes 6.5 x 284 brass . It’s a good choice as well

I have a rifle that was chambered with a 7PRC-AW reamer. I'm using Peterson brass and I still get clickers with full loads. Run a 180gr...

I had lasagna last night. The chemicals in it made me off-gas.

So I was able to make some ammo . Took some time to figure out what was causing my issues. One the adapter has an connection issue...

You could see if Hornady makes a pilot in the correct size, if they do that's an easy trimmer to use with straight cases. Locking head...

I would use the Lee. The Wilson will be a pain if no taper. Most straight wall rifle are tapered, but pistol are straight causing the...

Barrels are cheap, get one for each powder 🤣 Once all three are shot out compare notes, and you'll have a great starting point on...

Perhaps see how it shoots with each powder option and shoot the one with best accuracy? I'd think every combo will be fast! Just let the...

AB Raptor. https://www.absuppressor.com/raptor It has a reflex chamber that goes back over the barrel to increase volume without...

You gotta spring for the one with the cat on the endcap....

Unless he needs the larger caliber/ wants to use on handguns, then IMO for centerfire rifle use a 30 cal can is a better choice. I...

Thank goodness! Someone understands, thank you Kimber.

1000% accurate. A significant factor in powder burn rate is the SURFACE AREA that is reacting versus the total mass of propellant...