Looking for 280 AI NLRAB and LRX data

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by rharfo, Mar 20, 2014.

  1. rharfo

    rharfo Well-Known Member

    Messages:
    550
    Joined:
    Jun 24, 2012
    Shot several different loads of 150 long range accubond and 145 LRX but I didn't get any to group under a half. Rifle shot a .272 group with Nosler BT. Hoping I can do same with lab or lrx. Any load data that is working for you is greatly appreciated.
     
  2. clambdin

    clambdin Well-Known Member

    Messages:
    353
    Joined:
    Jan 20, 2005
    I'm running the 150 LRAB with H4831sc..very accurate and consistent !
     
  3. freebird63

    freebird63 Well-Known Member

    Messages:
    615
    Joined:
    Dec 20, 2009
    I'm running 168gr LRAB with retumbo and 215M. Very accurate.
     
  4. Bughole

    Bughole Well-Known Member

    Messages:
    93
    Joined:
    Jan 8, 2012
    My 280 AI is superbly accurate with H 4831 SC and Barnes 150 TTSX, I have not been able to get the 145 LRX to the same point. The chrony data for my 150TTSX is 3.306OAL 59.5 Gr H4831SC, Fed 210M primer, Nosler Brass, Load shoots one hole groups at 200 yds. ES is 12FPS Vel=2925. Best load in this rifle with the 145LRX is 60.1 of H4831 FED 210M ES 33, V=3052 groups are OK at .7 MOA but not the one holer of the previous load. Rifle has a four groove Krieger barrel 1/9.
     
  5. freebird63

    freebird63 Well-Known Member

    Messages:
    615
    Joined:
    Dec 20, 2009
    I first tried the long range accubonds seated into the lands and they did not shoot very well.....but then tried seating them at sami specs and that was the ticket.
     
  6. rharfo

    rharfo Well-Known Member

    Messages:
    550
    Joined:
    Jun 24, 2012
    Thanks everybody