300 Blackout Lake City Brass

scottwwv

Well-Known Member
Joined
Jun 15, 2017
Messages
90
Formed from once fired lake city brass. Fully swagged and formed. Tumbled and polished.
$11 per Hundred. Random check with a head space gauge.

I can ship 350 in small flat rate box for $7 dollars or close to 2k in a medium box for $14

Contact

Scott 304-692-5088
Text before Calling
Thanks
 

MudRunner2005

Well-Known Member
Joined
Oct 13, 2008
Messages
14,708
Location
Alabama
Location? Might be interested...

I make my own as well...Have a jig and a saw. Are these formed from 5.56 or factory LC .300 BLK? I know there's very little difference, just curious.
 

scottwwv

Well-Known Member
Joined
Jun 15, 2017
Messages
90
Sorry the are formed from once fired 5.56 LC brass. I did not include it in the description. They are very uniform and work great in my guns. I just have many thousands and want someone to get use out of them. I cannot shoot that many. The woman complains I shoot too much as is.

Location? Might be interested...

I make my own as well...Have a jig and a saw. Are these formed from 5.56 or factory LC .300 BLK? I know there's very little difference, just curious.
 

MudRunner2005

Well-Known Member
Joined
Oct 13, 2008
Messages
14,708
Location
Alabama
I wish I could afford 2000 of them... But I just started my new job yesterday, so don't see that being possible for several paycheck cycles. Not to mention the 2000 bullets to load in them. LOL

I make my own .300BLK from LC 5.56 as well. I have the CNC jig and mini chop saw setup. But, I moved 2 years ago, and I haven't been to a public range since (lots of land around to go shoot at, instead of paying to go to a range). The unfortunate side-effect is I no longer get to pickup all the freebie 5.56 I want, from other shooters who don't want it.

What's your cut/trim length for the brass? Also, have you swaged the primer pocket, or cut out the crimp? I have tools for both, so no big deal either way.
 

scottwwv

Well-Known Member
Joined
Jun 15, 2017
Messages
90
Sorry about delay on question.
COL is 3.357"
Primer pockets are swagged
Lake City 2012 Brass. Clean Brass.

What's your cut/trim length for the brass? Also, have you swaged the primer pocket, or cut out the crimp? I have tools for both, so no big deal either way.
 

MudRunner2005

Well-Known Member
Joined
Oct 13, 2008
Messages
14,708
Location
Alabama
I was talking about OAL of the cases themselves (not loaded), not COL. I think you're numbers might be off by a couple inches. You said you cut them down from 5.56, they should be somewhere in the neighborhood of 1.350"-1.360".

If I get some cash up, I'll let you know.
 

scottwwv

Well-Known Member
Joined
Jun 15, 2017
Messages
90
Yea shows i have fat fingers on these phones. Its 1.357 inches not what I posted above.


I was talking about OAL of the cases themselves (not loaded), not COL. I think you're numbers might be off by a couple inches. You said you cut them down from 5.56, they should be somewhere in the neighborhood of 1.350"-1.360".

If I get some cash up, I'll let you know.
 

Riflehunter1776

Well-Known Member
Joined
Nov 7, 2017
Messages
1,047
Scott cashed my check and got my money 3 weeks ago. So far all I've gotten is BS - No brass, only a bunch of contradictory excuses why he didn't send them after all this time and wont give a refund. I'll gladly invite any admin to the conversation where this transaction is documented.



BEWARE
 

Trending threads

Top