Inertia Puller

[Muddyboots]

So I break mine the other day and I only use it to break the neck tension then use collet puller. I was going to order and dropped by my LGS today, he was putting one on shelf! Just got it in today! How does that happen? I usually get had them in stock yesterday!!! Was cheaper than on line plus no shipping!

O

 

[Carlos88]

That never happens.

 

[GDKinCO]

I need to replace mine ... it's starting to let the cartridge fall through the collet on the first or second hit...

 

[xsn10s]

I need to replace mine ... it's starting to let the cartridge fall through the collet on the first or second hit...

I just use my single stage press shellholder instead of the collet.

 

[Pdyson]

I hate them things. I have beaten all the paint off of my bench vice and broken 2 pullers. Sometimes you have to wack'em so hard it deforms the point of your bullet.
I'm a Grip-n-pull guy now. Nothings faster and I haven't ruined one bullet or spilled
Powder yet.

 

[Old Rooster]

Got a brand new RCBS Inertia bullet puller and it has a foam insert that stops the bullet tip deforming problem.
I got it last year and just used it this past week,works great.
2 years ago I got the Frankford Arsenal wall mount inertia bullet puller but it makes too much noise here in my basement and scares the wife.
Works like a champ but noisy.
A friend brought 5 boxes of reloaded 30-06.The guy that reloaded them died and no one knows what is in them so I got several boxes of RP brass with a primer.I have a couple of boxes to go before being done.Looks like Winchester powder,748 or maybe 760

 

[BillLarson]

I hate them things. I have beaten all the paint off of my bench vice and broken 2 pullers. Sometimes you have to wack'em so hard it deforms the point of your bullet.
I'm a Grip-n-pull guy now. Nothings faster and I haven't ruined one bullet or spilled
Powder yet.

They work ALOT better if you hold something in your free hand like a 16 oz.hammer to hit them on...
Do Not Pound On Workbench/Cement floor.
I,ve used an RCBS for over 25 yrs.pulled alot of bullets.Still works well.As far as bullet deform.... put a couple cotton balls on the bottom...

 

[Lefty7mmstw]

I hate them things. I have beaten all the paint off of my bench vice and broken 2 pullers. Sometimes you have to wack'em so hard it deforms the point of your bullet.
I'm a Grip-n-pull guy now. Nothings faster and I haven't ruined one bullet or spilled
Powder yet.

put a foam earplug in the end of the dang thing if that's happening... I only use mine for pulling cast pills or if I overshot my seating die adj. I've got an rcbs collet for the heavy lifting...

 

[Muddyboots]

I only use mine yo break the neck tension then I switch over to RCBS collett puller. Breaking neck tension helps a ton pulling with collett.

 

[Ol' Red]

I need to replace mine ... it's starting to let the cartridge fall through the collet on the first or second hit...

You can get new collets on Amazon. Cheap, but they work good.

 

[koonazz]

They work ALOT better if you hold something in your free hand like a 16 oz.hammer to hit them on...
Do Not Pound On Workbench/Cement floor.
I,ve used an RCBS for over 25 yrs.pulled alot of bullets.Still works well.As far as bullet deform.... put a couple cotton balls on the bottom...

Hitting on a short block of 4x4 post works too.

 

[Mike Matteson]

I've used one for years and still do. It's the wrist action to give it a snatch. I use it on my concrete floor. I try not reload anything that doesn't work.

 

[K9TXS]

I've broken 3 of the hammers over the years. To me they're junk and wasted money.

I went with the Hornady puller. After I got use to it, I can pull bullets faster, save the powder and never leave a mark on the bullet.

 

[nksmfamjp]

Why not use something like the cam lock Puller from Hornady? It is generally faster and causes no damage.