Getting SCARY! Pt 2

liltank

Well-Known Member
Joined
Nov 3, 2008
Messages
4,198
Location
Central Pennsylvania
Finally got out to stretch the new load out with the AR Comp and 168NBT. Needless to say, if I miss... its definitely my fault. 3 consecutive shots at 718yds. The 2 shots at the bottom are figuring out my drops. The one on the left is mine in .308 and the shot on the right is my cousins .338 Lapua. The next three shots are after the final adjustment.

:D You can't wipe this grin off my face!
1101111310-00.jpg


Tank
 
Load data please
retiredcpo

RWS brass
F210M primer
Nosler 168 Ballistic Tip Hunting
Brass length 2.018"
42.8grn AR Comp by Alliant
2.300" (comparator length to the ogive) about .014" off the lands +/- .0005"

Avg fps. 2790
ES 4.5
SD 2.8

I use Redding dies with a Redding competition seating die

Tank
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top