Absolute most accurate load for 7mm STW?

James Kiser

Well-Known Member
Joined
Dec 22, 2011
Messages
172
Location
Augusta, Georgia
I have a custom 7mm STW 28'' kreiger barrel 1-9.5 twist and i reload for it. I normally use H1000 75.6gr, 168gr Berger VLD, CCI 250 LRM primers, c.o.a.l-3.60. It shoot pretty good with this load. I just want to know what yall think i should put through it to make it more accurate or should i just tweak what i got? Im not a speed freak so i dont care if its fast, just want accuracy.
 
check out the stw brotherhood thread if you want input on loads for that cal.

I personally have been using rl25 with 140's and 171's for quite a while.
 
The 162gr A-Max shoots tighter than the Bergers for me. Close to .5 inches at 250 yards over IMR 7828 and Federal GM215M.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top