WEATHERBY460
Well-Known Member
What full length die is best to be able to resize once fired/fire formed brass and be able to slightly bump? Thanks
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
What full length size (338 Lapua) to bump shoulder back slightly?
- Thread starter WEATHERBY460
- Start date
Help Support Long Range Hunting Forum
WEATHERBY460
Well-Known Member
Will a cheap RCBS work?
QuietTexan
Well-Known Member
A neck die... No once-fired case will have grown to the point the shoulders need to be moved.
Hornady makes universal-for-caliber neck only dies that don't need a bushing. I have a 25 WSSM neck die that I use with whatever bushing I need.
After that point it's all about does the die work with your chamber. The cheaper the die the more likely not IMO. Will be cut to a minimum chamber spec and will tend to overwork brass unless you're lucky.
Hornady makes universal-for-caliber neck only dies that don't need a bushing. I have a 25 WSSM neck die that I use with whatever bushing I need.
After that point it's all about does the die work with your chamber. The cheaper the die the more likely not IMO. Will be cut to a minimum chamber spec and will tend to overwork brass unless you're lucky.
