Pictures of your longrange rigs!

hmbleservant

Well-Known Member
Joined
Nov 14, 2010
Messages
119
Hey, I'm not sure if this has been done (if so please show me how to find it), but I would like to see some pics of everyones longrange rigs. Also, maybe a brief description of parts (stock, barrel, action, scope, etc).

I am looking at a near future build and need some ideas.

Show'em off!
 

WildRose

Well-Known Member
Joined
Feb 3, 2011
Messages
12,075
Location
N. Texas and S. Africa
Well it's not like any of us here are at all opposed to "gun porn"... .



Sendero 300 Rum.

Free floated and bedded by me.

Scope is an IOR 6-24x50 Settin in IOR 35mm rings on a Badger Base.

Shoots 180gr Siroccos well enough I haven't tried anything else. This is a 300yds target.


BTW I bought the rifle used here on the LRH classifieds from a fellow member. He bought it new and had the action and bolt face trued, other than my bedding and floating that's all that's been done other than me working the trigger over to a super smooth, crips, clean 1.5lbs.
 

Joe King

Well-Known Member
Joined
Apr 29, 2012
Messages
1,392
Location
The cold part of Montana
26.5" strait taper (don't do that it is HEAVEY) Douglass (I would spend money on a hand lapped barrel if I was you)
Still the origional stock, the action trigger and bolt have been all completely gone through and tuned. Chambered in 7mag. As it sits there it weighs 15lbs, take the bipods off and stick em in your pack and it's not to terrible to carry, but about 4lbs less would be way better. But as you can see she's seen some miles. Maybe one day it'll get a new stock and a paint job on the metal parts.


 

emn83

Well-Known Member
Joined
Feb 11, 2012
Messages
801
Location
east Iron Range, Minnesota
My baby:

.308 Win
Savage action timed and trued
Stockade Roolover Cheek Thumbhole Stock
Stockade recoil lug
Stockade Tactical bolt handle
26in Benchmark 1:11 heavy sporter barrel
Rifle Basix SAV-1 trigger
EGW 20MOA mount
Warne permanent attatch low rings
Vortex Viper PST 6-24X50 EBR-1 MOA reticle
 

Gene Jr.

Well-Known Member
Joined
Feb 6, 2009
Messages
173
Location
Lancaster, PA
Here is my 308 Baer. A Joel Russo & Bruce Baer project. It's had some upgrades since the photo. Spiral fluting and black cerakote have been done. No good new pictures though.

Stiller tac action, 28" benchmark barrel, Vias brake, Russo Bubinga stock.

IMGP4286.JPG

Gene
 

Trending threads

Top