I'm pushing the 143's over 3500 fps, I'll have to look at my data to give you the charge. I know it's over 80.0 grDoes anyone have experience with Hammer 131's or 143's using R26?
I have been running 81.5 GRNS. of H1000 in my custom 7 stw with the 160 accubond Lr. Has dropped several elk DRT. Might start a bit lower as that is fairly hot in mine but a super accurate load for itHi i'm new to the site and was curious if anybody has some good loads and data for 160 grain bullets . right now i'm using double taps which are nosler accubond with ballistics of 3305fps -3882 ft/lbs 26.0 " bbl Rem 700. granted i'm shooting a winchester model 70. Double tap is out of stock and i purchased the new burris eliminator 3 and need to get a good load before elk hunting in a few weeks
I have been running 81.5 GRNS. of H1000 in my custom 7 stw with the 160 accubond Lr. Has dropped several elk DRT. Might start a bit lower as that is fairly hot in mine but a super accurate load for it
I have been running 81.5 GRNS. of H1000 in my custom 7 stw with the 160 accubond Lr. Has dropped several elk DRT. Might start a bit lower as that is fairly hot in mine but a super accurate load for it
I have been running 81.5 GRNS. of H1000 in my custom 7 stw with the 160 accubond Lr. Has dropped several elk DRT. Might start a bit lower as that is fairly hot in mine but a super accurate load for it
You should be able to increase that substantially with RL26, RL33 or H1000. RL26 seems to give some crazy high velocities with the light and mid range bullets up to around 175gr.28" 1-8 twist Broughton 5c 180 lapua scenars 75.4 Retumbo 2850fps on the Magneto speed...no pressure signs. 1/2 inch grp for 5 rnds
80 degrees- 68 hum.
You should be able to increase that substantially with RL26, RL33 or H1000. RL26 seems to give some crazy high velocities with the light and mid range bullets up to around 175gr.
I'm shooting The Peregrine VLR5 153gr (prototypes) and if my numbers are correct we're somewhere around 3,450-3,500fps. Terminal performance is like hitting them with a lightning bolt. I have yet to have a big boar or a deer take even one step after being hit decently with that load.