New 6.5 Idea

Well put RHB, its nice to have some one like Goodgrouper follow up your work, there nothing like the call saying I got your load done it's hard to get it to shoot over 3/8!!, and know thats exactly what that gun is doing. Hope you post some of your accomplishments we can all learn a little on the way.
 
I could be wrong, but I'll go out on a limb and guess it won't get any more velocity than with RL17. Not in this casing. H1000 might come close, but I'm guessing not. In my experience with the 25-06, I got about 200 fps more velocity (3400) with RL17 with about 90% capacity vs Retumbo (3200) at close to 100%, pushing 115 gr bullets.

In any case, no one can complain about either the velocity or accuracy so far.

Now that I've typed out my prediction for all the world to see, probably a good chance I'll be wrong :rolleyes::D
 
I could be wrong, but I'll go out on a limb and guess it won't get any more velocity than with RL17. Not in this casing. H1000 might come close, but I'm guessing not. In my experience with the 25-06, I got about 200 fps more velocity (3400) with RL17 with about 90% capacity vs Retumbo (3200) at close to 100%, pushing 115 gr bullets.

In any case, no one can complain about either the velocity or accuracy so far.

Now that I've typed out my prediction for all the world to see, probably a good chance I'll be wrong :rolleyes::D

I'm with Mark on this one. Maybe we'll both be wrong!:D......rich
 
I'm not disagreeing with either of you. Just another powder I thought of that might work also. Seems to favor these kind of cartridges. Superformance powder. Just a thought.
 
Thanks for the suggestions guys, we have been discussing our next test and the powders to try but the real question is whether the little case will hold enough slow powder to get any velocity? I've got a pillar bedding job ready to put in the glue in the morning and then I'm going to sit at the scales and see how many grains of the various slower powders, I can get into the case using a long drop tube with swirl charging. Bulky powders are not going to work in this case. --- RHB
 
Thanks for the suggestions guys, we have been discussing our next test and the powders to try but the real question is whether the little case will hold enough slow powder to get any velocity? I've got a pillar bedding job ready to put in the glue in the morning and then I'm going to sit at the scales and see how many grains of the various slower powders, I can get into the case using a long drop tube with swirl charging. Bulky powders are not going to work in this case. --- RHB

I think I would try some N560 and RL22. Maybe RL25.......Rich
 
The question is...... Where to find 33???

I was hoping I could get some from you :)

From what I've read, I think 33 would be too slow in that case. Seems it is slower than Retumbo......Rich

After doing a quick search it looks to be between 1000 and Retumbo, close to Retumbo. If the case can hold 50+ gr of powder and it max'd at 46 of RL17, putting it at about 90%, RL33 might be a contender, maybe with a slightly compressed load???
 
I was hoping I could get some from you :)



After doing a quick search it looks to be between 1000 and Retumbo, close to Retumbo. If the case can hold 50+ gr of powder and it max'd at 46 of RL17, putting it at about 90%, RL33 might be a contender, maybe with a slightly compressed load???

Mark....AZShooter (this forum) loaded up to 102 grains in a 300 ultra with a 230 Hybrid. I don't think you can come close to that with Retumbo......Rich
 
Mark....AZShooter (this forum) loaded up to 102 grains in a 300 ultra with a 230 Hybrid. I don't think you can come close to that with Retumbo......Rich

Well... yeah, that would be quite slow.... going from memory, my 300 RUM is maxing @ 92 gr of Retumbo with a 210 Berger and 98 with a 180 E-Tip. 100 gr is approx 100% case capacity with bullets seat up into the necks.

Can you link a thread?
 
I was hoping I could get some from you :)



After doing a quick search it looks to be between 1000 and Retumbo, close to Retumbo. If the case can hold 50+ gr of powder and it max'd at 46 of RL17, putting it at about 90%, RL33 might be a contender, maybe with a slightly compressed load???


IF i had some I would gladly make a trip to you!!!! when I go to Lima for my elk hunt this year!!!! hahahahahah I ordered some for my 338 Lapua but not sure if I actually made an order cuz it may be on back order
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top