Suppressor Suggestions?

[Konrad.INc]

I own a 30 cal thunder Beast ultra 7 that I use on several different rifles, most of which are hunting rifles. My main hunting rig is a 7 SAUM, I wouldn't go with anything smaller than the 7" on that size case you just won't get the sound suppression you need. It sounds like your primarily running the large magnum cases so I would think very seriously about a tbac Ultra 9 in 30 cal, if you are worried about the length in the field then maybe, maybe get an ultra 7 but you will take a hit in sound suppression.

 

[Night Stalker]

I have a varminter 3.0 sold by Dakota silencers and made by Mack brothers. I love it it's 9" long full titanium and weights 13 oz. And is extremely quite. I use it on my 22 all the way up to my 300 ultra mag.
They now have the varminter 4.0 out and you can change the length of the suppressor from 9" to 7" by taking out a couple of the baffles in the suppressor. These are definitely worth checking out and priced very reasonably.

You are spot on with this Can..one i use one my 7mm mag & 6.5 creedmore the other is used on 5.56 , .221 fireball, 22 mag
Titanium in my opinion is Tops..!
Actually the larger can i use on the smaller cals..and sometimes more effective.
Mack Bros has a new version..it out on due out soon
I prefer thread on and i do my own treading..just saying
And the bonus to a can...lessons recoil..

 

[Night Stalker]

 

[woodnut]

Sorry I didn't get on this sooner, but I have eight of the addictive cans! All of mine are build in Radford,Va. at T & J Tactical,LLC. All are direct screw ons. LOVE them! I have a 30 cal. can I put on my 7 STW and it makes one grin from ear to ear! He does make cans to attach to brakes,too. Quick attach. You really should talk to Jeff before buying.
I have not noticed any POI shift when I take it off and put back on. Yes, POI does shift when you go from no can to a can, but once my rifle is zeroed with a can, it stays zeroed. Accuracy is improved. True, it will add length and weight so consider that.
Now for a bummer. Today it may take a year to get one! The approval process is extremely slow now. I do recommend getting a Trust for it so you can pass it on and those on the trust can use it.
Contact Jeff at T&J. He's trustworthy and very knowledgeable. 540-605-0603. Has a web site and email at [email protected].

 

[hrnhntr]

+1 Thunderbeast ultra 9

 

[DWill]

I'm also relatively new to suppressors but I'd highly recommend the Thunderbeast products. I have a 338 Ultra on my 338 Edge and am very happy with it. Also have a 30-06 Ackley and purchased two of their 338 brakes so switching the can between the two is simple and I've not had any zero shift swapping the can. If I'm going to shoot without the can there is a small shift in POI.

Only complaint is it adds 10.4" to what's already a pretty long setup. So, I'm planning on getting a 30 cal Ultra 7 to use on the -06 and a new 6.5 build. But the can is very well made, light and functions well. I can't believe how quiet the Edge is with the can.

 

[dan1953]

I want to second the sig sauer SRD762QD, I do have it in titanium and love the quick disconnect and use it on several guns. Very convenient to switch, also to carry to where hunting and attach with zero point of aim changes.

 

[ForeverZ01]

I'm running a switch barrel setup, 338 lapua, 300 norma, 7-300 Norma improved, all will have area 419 setup on them with a 338 ultra thunder beast when it clears ATF.

 

[Grauch]

I have a 7mm PRC and use a Silencer Co Meat Eater makes my kick like a 270 and reduces sound 35-40%. I can adjust to focus on kick or sound with a 10% difference . I also can twist it to a happy medium. If sound is the priority I can bring it down to 32 decibels. I still wear hearing aid., without it the gun would be the same as a 7mm magnum sound and kick. Finding the right load will also control the recoil and sound to a point. For example to shoot the Hornady Super velocity is a beating, when in reality it is the wrong harmonics for your gun. Example loading N-565 for 7MM PRC on a Fierce Carbon Roque 22 inch when I hit Max the piercing sound was piercing the foam I put in my ears. Where as when I backed the load back to the node at 64.3-64.4 the accuracy and SD I got a ,213 group and SD of 8 with 1 3 inch group. They can work hand and hand.

 

[06 SB]

I see the TBAC homers have showed up in force. I personally prefer the DD Enticer STi. I do not own a TBAC but have been around a few at the range. No doubt they are good, but I like my Enticer…same sound, same weight, $400 cheaper.