made some loads for my new 30-06...

[22-250hunter]

powder i used was imr 4064 loaded up some 168 grain hornady match starting at 49 gr increasing .5 till i got to 50.5 then i went to 50.7 and stopped with a coal at 3.400 and also loaded up some sierra match 168 grain with 53.1 grains and a coal at 3.300 it loved these didnt like the hornadys at all and it kinda sucks iv always had good luck with them was wondering if anyone thought maby my loads were bad for the hornadys or not.
this was a 3 shot group at steel at 200

 

[gohring3006]

powder i used was imr 4064 loaded up some 168 grain hornady match starting at 49 gr increasing .5 till i got to 50.5 then i went to 50.7 and stopped with a coal at 3.400 and also loaded up some sierra match 168 grain with 53.1 grains and a coal at 3.300 it loved these didnt like the hornadys at all and it kinda sucks iv always had good luck with them was wondering if anyone thought maby my loads were bad for the hornadys or not.
this was a 3 shot group at steel at 200

Try the Hornadys with some more jump. Maybe the same as the SMKs or in between 3.35in

 

[22-250hunter]

thanks ill give that a try my 308 likes the horndays would be nice if my 30-06 would too