HELP W/ 300 RUM LOADS

[Fotis]

200 gr Accubond 92 gr RL25--my max load

http://longrangehunting.com/ubbthreads/showflat.php?Cat=0&Number=88894&an=0&page=0#88894

 

[bailey1474]

I went out and tested the 85 gr load this morning. 3 shots measured .269" CTC. The sun was just coming up so the chrono didn't read too well. We didn't have enough time to set up the infrared system but I know it will be right @ 2850 fps + or - 10 fps. This load is VERY accurate @ 100 yds. I'll test it out on a doe this weekend.

 

[300Rumbum]

I have the same rig. Try 96.0 grains of RE25 behind a 180 Nosler Accubond, Fed. 215M primer. I think you will like it. 3350 fps. Very nice groups. Dead crow at 340 yards last week with this. Work up from below, watch pressure signs. Good luck.

 

[sniper2]

Try 102g A8700/200g Accubond 3.7 OAL sub sub min in my rig.
Please start with lower powder charge and work up!!!

 

[Indyultra]

Have a RUM Sendero that really likes 93gr H1000 Rem brass Fed 215M and 180 Nosler BT's