.300 Rem sendro extractor issue

[Thumper308]

Gents
Im having issues with my 300 win mag 700 rem sendro. Extraction , have small brass shavings on bolt face and it dont want to extract all the time,
About every 3rd shot I have to cycle the bolt up to 1/2dozon times to get it to extract and eject.
What gives?? Need help please

 

[Tikkamike]

for starters remington extractors are a joke. go have a mini m-16 style extractor put on it. Secondly you may be over pressured or maybe a dirty chamber... but really a new extractor is a very worth while upgrade

 

[Thumper308]

Mike
Psi is ok, chamber good, brass is good,
What/who can I send it to for a m16 extractor install, just the bolt or whole rifle?
Getting flustrated with it.

 

[Tikkamike]

send your bolt to kampfield customs he can do it for around $100 he will also flute the bolt for like $60 if you like. both are very cool bolt upgrades

 

[Thumper308]

Shoot me a web site

 

[Frank7mm]

He will need the barred action as the mini 16 extractors required the counter bore in the barrel to be opened up from .715 to .785ish. When installed properly a rem will rip a chuck brass out just like a sako or M16 style.

 

[Tikkamike]

He will need the barred action as the mini 16 extractors required the counter bore in the barrel to be opened up from .715 to .785ish. When installed properly a rem will rip a chuck brass out just like a sako or M16 style.

Really? I have never heard of such a thing. im going to look into this now

 

[Frank7mm]

I thought maybe you did not have to on a mini but if you look on PTG it states it in the product description. Just replaced a factory one that was weak. Factory one can be tricky to get right though.

 

[Thumper308]

Going to call Kampfield on monday for info on fixing my bolt.
Thanks guys

 

[LONGSHOOTER]

Do you by chance have longitudinal scratches on your brass?

 

[Thumper308]

No scratches that I can. Tell, the screws for the scope rail are not protruding into the chamber.
I shot it yesterday and 3 fail to extract . Lot of brass slivers around extractor, loads are mid power reloads.not hard to close bolt on trimmed to book spec, I'm at a loss on what issue is, done research and thinking on m 16 style extractor

 

[shortgrass]

There is a simple 'fix' for that Remington extractor. It's a whole lot cheaper than having bolt alterations done, too.

 

[Thumper308]

Short grass
What is it?

 

[etisll40]

Yeah Shortgrass! Give it up!!

Thanks for chiming in.