Dnk9444

I put an HS Precision in mine and it works flawlessly. No modifications. It fit like a glove.

HS precision is the best if not only close to flush fit mag, to fit a bdl inlet. They are fairly pricey but work great and their mags...

I have a HS Precision bottom for my 700. Had to do some minor inletting with a file, but that was about it. Works great.

I have a R700 7prc in an AG composite stock with a factory hinged floorplate. What would be a good choice for a drop in detachable mag...

I did remove the firing pin and spring. I sprayed and cleaned it and the bolt body. It seems to be much smoother.

This will make the job much easier. https://www.midwayusa.com/product/1007101112?pid=492351 I've disassembled a couple of mine and...

I have not. I will try that and see. Thanks.

check the front action screw, i had a mauser the had very hard bolt closing and lifting. the front screw contacting the right bolt lug.

If the issue isn't somewhere in the ignition system, consider lapping the bolt lugs. Pretty easy process, jist takes a little patience a...

Ok. I have not had it apart. Primer and everything are fine. I was just wanting it to feel smoother and easy. I’ll look in to breaking...

I have a factory rem700 from about 2014. It has a pretty hard and gritty bolt lift. What can I do or have done to it to make it smooth...