270 win quickload question

[Highvoltage]

I hope this is where I should ask this... I'm starting a load development for a new 270 win build. I was wondering if someone could help me with a quickload for 2 bullets.

Win brass
Federal 210 match primer
Reloder 26
24" barrel
3.380 oal
145 eldx / 140 Sierra tipped gamechanger

If anyone could help me out that would be greatly appreciated. I'm thinking close to 61gr from a few posts I've dug up but just want to be safe. Thanks so much

 

[sedancowboy]

I would start below that and work up. I topped out at 59.0. RL-26 will pressure out really fast so approach the top with caution.

 

[Highvoltage]

I would start below that and work up. I topped out at 59.0. RL-26 will pressure out really fast so approach the top with caution.

That sounds good... the 61 was on the max end and I was thinking 58 to start. Did you use either bullet in your testing?

 

[sedancowboy]

I have used the 145 ELD-X and a 150 ABLR Both worked well. The 150 ABLR will come apart at close range.