6.5-300 BEE
Well-Known Member
Good luck OP !
Blackdirt Cowboy is right....tells you instantly what the problem is.Try your ammo in a buddies 300 win mag if your loads are similar and it can be done safely. That will tell you right away wether it's an ammo issue or a gun issue.
You should be in great shape with your new rig. As I mentioned to the others, we are here to support you if you have any questions or concerns. Happy shooting!Guess I'll be watching this thread. Just got the same rifle in yesterday, Bergara B14 HMR Wilderness 300 WM. I plan on going to the range next and burn up some old factory ammo to check it out before reloading. I have new Norma brass, H1000, and Berger 215's to start my handloads on. Hopefully it goes better than the OP, 101stCurrahee.
Afternoon Gentleman! In full transparency, it should be known that I work for Bergara in Lawrenceville, Georgia.
I'm not here to get into any debates or try to dissuade your opinions on Bergara. I simply wanted to reach out to make sure that 101stCurrahee had our contact information so we can help diagnose his concerns. There are a ton of variables that go into hand loads and that's why we always benchmark with either match or premium factory loads for feed, function and accuracy purposes. If it will perform for factory loads then you can reasonably expect to improve using safe reloading. practices. For the 300 WM specifically, our go to load is the Norma 180 gr Oryx. Another bullet that shoots extremely consistent for us are the 185 Gr Juggernauts.
As for the bedding, the rifle should not need it. It is molded around an aluminum mini-chassis that is very solid. What i have seen sometimes is that a little bit of paint gets built up on the pillars and that can cause the gun to be fussy until removed.
View attachment 191949
At any rate, we absolutely guarantee our product to perform as advertised. If you believe you have an issue please do not hesitate to call us at 877-892-7544 or feel free to email me directly and I will have a technical support person call you. My email is [email protected].
Thanks,
Nate Treadaway
Thank you Nate. I am already in contact with you guys and have an RMA in progress. I'm going to have someone very qualified shoot it with your recommended factory ammunition to confirm before I send it back in.Afternoon Gentleman! In full transparency, it should be known that I work for Bergara in Lawrenceville, Georgia.
I'm not here to get into any debates or try to dissuade your opinions on Bergara. I simply wanted to reach out to make sure that 101stCurrahee had our contact information so we can help diagnose his concerns. There are a ton of variables that go into hand loads and that's why we always benchmark with either match or premium factory loads for feed, function and accuracy purposes. If it will perform for factory loads then you can reasonably expect to improve using safe reloading. practices. For the 300 WM specifically, our go to load is the Norma 180 gr Oryx. Another bullet that shoots extremely consistent for us are the 185 Gr Juggernauts.
As for the bedding, the rifle should not need it. It is molded around an aluminum mini-chassis that is very solid. What i have seen sometimes is that a little bit of paint gets built up on the pillars and that can cause the gun to be fussy until removed.
View attachment 191949
At any rate, we absolutely guarantee our product to perform as advertised. If you believe you have an issue please do not hesitate to call us at 877-892-7544 or feel free to email me directly and I will have a technical support person call you. My email is [email protected].
Thanks,
Nate Treadaway
For anyone not paying attention here... Nate Treadaway doesnt just "work at Bergara" he's the CEO of BPI.Afternoon Gentleman! In full transparency, it should be known that I work for Bergara in Lawrenceville, Georgia.
I'm not here to get into any debates or try to dissuade your opinions on Bergara. I simply wanted to reach out to make sure that 101stCurrahee had our contact information so we can help diagnose his concerns. There are a ton of variables that go into hand loads and that's why we always benchmark with either match or premium factory loads for feed, function and accuracy purposes. If it will perform for factory loads then you can reasonably expect to improve using safe reloading. practices. For the 300 WM specifically, our go to load is the Norma 180 gr Oryx. Another bullet that shoots extremely consistent for us are the 185 Gr Juggernauts.
As for the bedding, the rifle should not need it. It is molded around an aluminum mini-chassis that is very solid. What i have seen sometimes is that a little bit of paint gets built up on the pillars and that can cause the gun to be fussy until removed.
View attachment 191949
At any rate, we absolutely guarantee our product to perform as advertised. If you believe you have an issue please do not hesitate to call us at 877-892-7544 or feel free to email me directly and I will have a technical support person call you. My email is [email protected].
Thanks,
Nate Treadaway
awesome a person could not ask for more great to see thisAfternoon Gentleman! In full transparency, it should be known that I work for Bergara in Lawrenceville, Georgia.
I'm not here to get into any debates or try to dissuade your opinions on Bergara. I simply wanted to reach out to make sure that 101stCurrahee had our contact information so we can help diagnose his concerns. There are a ton of variables that go into hand loads and that's why we always benchmark with either match or premium factory loads for feed, function and accuracy purposes. If it will perform for factory loads then you can reasonably expect to improve using safe reloading. practices. For the 300 WM specifically, our go to load is the Norma 180 gr Oryx. Another bullet that shoots extremely consistent for us are the 185 Gr Juggernauts.
As for the bedding, the rifle should not need it. It is molded around an aluminum mini-chassis that is very solid. What i have seen sometimes is that a little bit of paint gets built up on the pillars and that can cause the gun to be fussy until removed.
View attachment 191949
At any rate, we absolutely guarantee our product to perform as advertised. If you believe you have an issue please do not hesitate to call us at 877-892-7544 or feel free to email me directly and I will have a technical support person call you. My email is [email protected].
Thanks,
Nate Treadaway
Nate is a great guy and quite humble. He works the booth at SHOT and other shows and is not like other execs that hide in the meeting rooms!For anyone not paying attention here... Nate Treadaway doesnt just "work at Bergara" he's the CEO of BPI.
OP... name one company where the CEO answers your post? (Mark Larue sh**posting on arfcom doesnt count)
This is the level of CS I have seen from Bergara when I had to contact them about something way simpler in the past.
Sounds good! I'm here to help in any way I can.Thank you Nate. I am already in contact with you guys and have an RMA in progress. I'm going to have someone very qualified shoot it with your recommended factory ammunition to confirm before I send it back in.
Completely agree, I contacted their customer service about an issue I was having with cratered primers on two early model B14s that I had, and he personally responded to my email to discuss options to help fix the issue and then connected me directly with their customer service team to follow up and close out my issue.Nate is a great guy and quite humble. He works the booth at SHOT and other shows and is not like other execs that hide in the meeting rooms!
Afternoon Gentleman! In full transparency, it should be known that I work for Bergara in Lawrenceville, Georgia.
I'm not here to get into any debates or try to dissuade your opinions on Bergara. I simply wanted to reach out to make sure that 101stCurrahee had our contact information so we can help diagnose his concerns. There are a ton of variables that go into hand loads and that's why we always benchmark with either match or premium factory loads for feed, function and accuracy purposes. If it will perform for factory loads then you can reasonably expect to improve using safe reloading. practices. For the 300 WM specifically, our go to load is the Norma 180 gr Oryx. Another bullet that shoots extremely consistent for us are the 185 Gr Juggernauts.
As for the bedding, the rifle should not need it. It is molded around an aluminum mini-chassis that is very solid. What i have seen sometimes is that a little bit of paint gets built up on the pillars and that can cause the gun to be fussy until removed.
View attachment 191949
At any rate, we absolutely guarantee our product to perform as advertised. If you believe you have an issue please do not hesitate to call us at 877-892-7544 or feel free to email me directly and I will have a technical support person call you. My email is [email protected].
Thanks,
Nate Treadaway