emp1953

A buddy of mine has the same rifle and it shoots lights out. They are guaranteed 1moa out of the box. Tikka barrels are cold hammer...

Never chronographed it but using Noslers load data I estimate it around 2625fps

just had a successful hunt with a 6.5Creedmoor. Nearly everyone in camp had a 6.5CM. 12 deer shot, all one shot kills at ranges out to...

I know I could have gone up near max loading but I've never chased the max velocity and max pressure. I was always content with a load...

Yah but they are boxes of 100, not boxes of 50

Hard to go wrong with Vortex on price and quality

I needed to upgrade my vision. Had trouble counting points on antlers at distance. I went with Vortex Crossfire HD 12x50. Got it for...

Weatherby Vanguard with a Leupold VX-Freedom 1.5-4x20 Pig-Plex. 39.8gr H4350, 140gr Nosler Accubonds, Rem 9 1/2 LRP, new Starline...

My experience with LRAB hasn't been good. They were difficult to find accurate loads for in my rifles. Oddly enough, the regular...

I reload for a Rem700 24"barrel 1:10 twist. 47.2gr IMR3031, 165gr Nosler Partitions, CCI200 Primers, Federal cases, .020 off the lands...

I've been reloading since 1970. 30-06, .270win, 243win, 6.5CM. I burned a lot of powder trying to find a really accurate load with...

Just returned from a white tail hunt and my first experience with 6.5CM and Accubond bullets. Nothing to brag about size wise but the...

i have never loaded for or shot an '06 with a short barrel. You might need to go to a faster burning powder. I load 48gr IMR3031 165gr...

Before I had access to a chronograph ( I now borrow a buddy's ) I did what you did. Except I zeroed for 100yds then moved out 100yds...

I use an old fashioned Q-tip on the crown. Slide it in and out all around the bore to see if any fibers are pulled off by burrs or...