Which annealer?

I was going to purchase an Annie, it seemed as if everyone was having issues with it arriving in a timely manner. I had read some was already past the six weeks since purchasing it. That is the only thing that kept me from buying it, the expense at the time was not a great deal breaker. Let us know how it works out for you.
I think current wait is 3-4 weeks. Im ok with the wait. We will see
 
I was going to purchase an Annie, it seemed as if everyone was having issues with it arriving in a timely manner. I had read some was already past the six weeks since purchasing it. That is the only thing that kept me from buying it, the expense at the time was not a great deal breaker.
I've got an Annie too. With some temp paint, I can figure out the settings for each type of my brass. It was considerably cheaper than the AMP. I have never heard anyone on the forum say they didn't have a problem getting their Annie delivered and I'm no different so I would have a hard time recommending it.
I've had the Annie for years now and it has done what I need it to do with little effort. After reading the Applied Ballistics chapter on annealing, I only anneal to prolong case life. In general, I haven't had an issue with split necks as I'm pretty careful with my reloading practices to minimize working the brass.
The DIY induction annealer info in the thread earlier looked interesting. However, the photo on the video name with the red overheated case makes me wonder about the guys producing the video.
 
I have the latest gen Anealeez and it works great. Only down side is having to pay extra for the wheel sets for different calibers. Of course, I needed all three sets to handle all my calibers.

I've actually including annealing almost all the time when I'm loading my precision hunting calibers. I find it creates more even neck tension and with softer brass, neck trimming is far easier. And the biggie is your brass lasts way longer.
I have two Annealeez - bought one new and bought one used. I have one set for "short" cartridges - 6BR, BRA, Dasher, Grendel, ARC, 224V and one set for the 65 Creedmoor and 260 length. I have no issues with the Annealeez and I anneal after every firing.
 
Ok. I've been salt bath annealing for several years. I've had good luck with it. But my melting pot just died today. So I think I'm gonna take the opportunity to look at other annealing options.

So what's everyone using and what's the best bang for the buck when it comes to annealing machines and such?
If your annealing process worked for you, why change? Get another melt pot???
 
Worked, but I was always a little sketched out by the boiling liquid salt sitting on the bench. Other options seem a little safer.
I understand. It seems you have 3 choices then:

1. Drill and socket (cheap)
2. Various makers flame annealing ($250-$500)
3. AMP ($1600-$2600)

As always, cost is the break point. Good luck.
 
Last edited:
I like this one, adjustable cartridge depth without changing wheels, but it's single feed I think. I usually stand and watch when I anneal anyway but having a 20 case hopper is nice.
I have thought about trying to rig up a hopper system to this one if I get the time and ambition. It would be nice for larger loads of brass. But for the time being and the amount of brass I do. It's fine as is.
 
Ok. I've been salt bath annealing for several years. I've had good luck with it. But my melting pot just died today. So I think I'm gonna take the opportunity to look at other annealing options.

So what's everyone using and what's the best bang for the buck when it comes to annealing machines and such?
Good morning! I've seen on YouTube a fellow had a hand held induction device for rusted bolts, stay with me now, he integrated a timer
so that the brass didn't over heat. I believe he was from Texas. The tool came with many elements for different applications. HTH
 
Top