17remhunter
Well-Known Member
Looking at getting a 6 CM and have been seeing StalBALL powder in our local store has anyone had any experiance useing it in 6mm's any bullets wt just wanted your feed back
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
StalBall powder experiance
- Thread starter 17remhunter
- Start date
Help Support Long Range Hunting Forum
I haven't used it in 6mm, but in 270 win it is a screamer. 3150 avg 22 in barrel and 127 controlled chaos and 1 moa or less. The hodgen website has staball data with the creedmoor.
Another Casual
Well-Known Member
I've been meaning to buy a pound to try. I've seen everything from rave reviews to people saying its the worst. Give it a go if the price is right!
nealm66
Well-Known Member
It works good for 6 creed. I'm about 43 gr's with Berger 108/109's and 3100ish fps with Peterson brass
Starts a mean campfire 
slikmrc
Well-Known Member
I used StaBall to break in 6 CM barrel and form brass. 105 grain bullet @ 3000 fps, rifle shot great and SD's were good considering it was a quick load work up for new brass and barrel. I've tried it in a few other cartridges with good results also. Sd's did tighten up a little when I tried a Rem 9 1/2M primer so that was interesting.
17remhunter
Well-Known Member
im shooting H4895 in my .17 Remington 25gr @ 4065 StaBall will get me up to 4130 with the same pressure worth a try. Every powder I tired in my 17 shot great...... CFE223, A2700, and H4895
BruceP
Member
I use it for my 25 Creed XP100 and 100 grain bullets. I don't shoot competition but do ring steel out to the 500 yard max for our club range. I've shot groups in the .3's at 100 yards with rounds that were thrown with an RCBS Uniflow measure.
