Th
Then you get to add a can too...lolOnly problem with the .338 is I won't be able to run my can....
Then you get to add a can too...lolOnly problem with the .338 is I won't be able to run my can....
Lol... that's what I do when I think I should start exercising...not buying guns!Sit down, close your eyes, relax and give it a little time you will get over it
He's trying to stay with .30 cal so he can use his current .30 cal Omega can.
Like so many here are saying...I added a .338 lapua to fill the gap between the 300 Weatherby and 460 Weatherby's I have..I bought the Weatherby Tac Mark. I have well over 2 dozen below .300 variations, but even now I am beginning to question myself as to why...some people collect Art...aren't guns ART?Ok, here's the scoop. I have a 300WM that I've just re-barreled re-stocked into my long range hunting rig. It's approx. 9 lbs with optics and with hand loads will shoot 1/2MOA with the Berger 210VLD's @ 2800fps. Don't ask me why, but I have the itch for a new build.
Questions:
1. Will I gain that much from a newer "latest and greatest" cartridge. (Edit: Decided on a new tinker toy, so just looking to better what I have)
2. If so, what cartridge would you go with?
6.5 PRCOk, here's the scoop. I have a 300WM that I've just re-barreled re-stocked into my long range hunting rig. It's approx. 9 lbs with optics and with hand loads will shoot 1/2MOA with the Berger 210VLD's @ 2800fps. Don't ask me why, but I have the itch for a new build.
Questions:
1. Will I gain that much from a newer "latest and greatest" cartridge. (Edit: Decided on a new tinker toy, so just looking to better what I have)
2. If so, what cartridge would you go with?
I'm not familiar with suppresors, but will his work with a 7mm cartridge?
If so the 7 SAWM is a great option.
Aye Sir! It will work with clearance less than his (i.e., .300 WM and less) but like the muzzle brakes, effectiveness varies, and of course same muzzle threading.
Eliteiron Bravo SD on my full custom .30 LARA ...
View attachment 147732
Eliteiron Bravo SD on my 6.5 CM TCA Compass ...
View attachment 147734
... I can also screw it on directly on 2 of my 3 .300 WMs, .300 WSM,.270 AI, and .264 WM.
===================Ok, here's the scoop. I have a 300WM that I've just re-barreled re-stocked into my long range hunting rig. It's approx. 9 lbs with optics and with hand loads will shoot 1/2MOA with the Berger 210VLD's @ 2800fps. Don't ask me why, but I have the itch for a new build.
Questions:
1. Will I gain that much from a newer "latest and greatest" cartridge. (Edit: Decided on a new tinker toy, so just looking to better what I have)
2. If so, what cartridge would you go with?
I have a 330 Dakota it will push a 200 grain Nosler bt just over 3100ft it is on m70 pre war with Lilja 26 inch 3 grove Just love it It will reach out and touch something.Ok, here's the scoop. I have a 300WM that I've just re-barreled re-stocked into my long range hunting rig. It's approx. 9 lbs with optics and with hand loads will shoot 1/2MOA with the Berger 210VLD's @ 2800fps. Don't ask me why, but I have the itch for a new build.
Questions:
1. Will I gain that much from a newer "latest and greatest" cartridge. (Edit: Decided on a new tinker toy, so just looking to better what I have)
2. If so, what cartridge would you go with?
If that works for you ... you Sir is a better man than most of us.
Lol... that's what I do when I think I should start exercising...not buying guns!
Have you looked at a 7.82 Warbird? Love mine a lotRest assured guys, I've mastered what I have and I'm an accomplished long range shooter. I just like tinkering with projects.
Not cause I need to, just cause....
Already have a 6.5CM for plinking. This will be another long range hunter.
I'll check with silencerco tomorrow and see what they have to say about the Omega and the 300NM. If it won't work, then all bets are off and the 338's are back on the block.
Looking into the 300NMI also.
There is another option:Ok, here's the scoop. I have a 300WM that I've just re-barreled re-stocked into my long range hunting rig. It's approx. 9 lbs with optics and with hand loads will shoot 1/2MOA with the Berger 210VLD's @ 2800fps. Don't ask me why, but I have the itch for a new build.
Questions:
1. Will I gain that much from a newer "latest and greatest" cartridge. (Edit: Decided on a new tinker toy, so just looking to better what I have)
2. If so, what cartridge would you go with?