New build ideas

IMG_3305.jpeg

😇
 
Sounds like you might just need a barrel burner, I believe Sherman's 7 SM might fit the bill. You can also always go with an original 18-20" .308 to provide some challenge.
Or the 6 Max or 6 PRC. Been thinking about that those 2.
 
You have a serious problem sir. You should immediately cease and desist all use of these firearms and send them immediately to me. 🤣

Looks like you have all the bases covered given you lack of interest in the .338. I just modified a 33 Nosler reamer to accept bullets out to 3.600" and am going to try to finish off a Nilgai that eluded my 7SS (w/ 195's) in Nov of 22.
I love my 28 N with the 195s for Nilgai. Killed a cow last fall at 350 in a super high cross wind. DRT
The 300 PRC got one a few weeks ago. Very impressive chest to tail pass through.
 
Thanks everyone for the replies. Some great ideas. Been leaning toward one of the ultra fast 6MM like the 6 SM. Rich said 3600 fps with a 110. That's smoking!! But I am kind of a frugal guy and even the 28 N barrel life makes me cringe. The 6 SM would be even worse. Might not make it through load development!!!! LOL
 
Thanks everyone for the replies. Some great ideas. Been leaning toward one of the ultra fast 6MM like the 6 SM. Rich said 3600 fps with a 110. That's smoking!! But I am kind of a frugal guy and even the 28 N barrel life makes me cringe. The 6 SM would be even worse. Might not make it through load development!!!! LOL
6SST will do 3400 w. 108s. 6 Max (SAUM Imp 40°) will do 3500. Barrel life is 1.5x 28 Nosler. But way easier to shoot. 6 Mega (WSM Imp 40° long neck) would have to be 3600+. A 6 Sherman Mag (6-300PRC Imp 40°+) would have to be 4000-4100+. Not sure if he actually makes that reamer though.

The 25 versions of each will push those high BC 133/135 a bit slower but carry a lot of energy. I have a 26" 25SST running a 133 @ 3240 w H1000, and have 800+ rounds and going strong. I am hoping for 1200+ rounds. Building a 22" 25PRC/SI and hoping for close to 3200 w. RL23. Those high BC bullets pushed to 3200+ get to 1k really quickly and hit with some authority. I took a pronghorn at 875 with my 25SST. I think the 25 Max would do 3350, and the 25 Mega should do 3450ish?

This was before I fine tuned my loads to 3240.

 

Recent Posts

Top