Magnetospeed V3 better pics

stokley1

Well-Known Member
Joined
Dec 12, 2012
Messages
49
Just a better of of the magnetospeed attached via rod bedded into stock.
 

Attachments

  • image.jpg
    image.jpg
    290.8 KB · Views: 55

86alaskan

Well-Known Member
Joined
Jan 8, 2014
Messages
1,192
Location
Central Missouri
so the rod is bedded especially for the magnetospeed? that's a pretty slick way to eliminate the barrel contact. How's it function as far as reliability? does the extra frame allow the strap to stay tight the whole time?
 

stokley1

Well-Known Member
Joined
Dec 12, 2012
Messages
49
Yes. I works very well. I fired 50 rounds over and it never needed re tightening. I took the aluminum rail out of the Fore end of the stock and bedded the rod into the slot. And use the same screws that hold the aluminum rail in place to screw the rod to the stock. Then strapped the magnetospeed to the rod and bent the rod to fine tune where the chrono sits. I have it perfectly lined up and it works really well. It recorded every shot. I am very pleased with the set up.
 

Attachments

  • image.jpg
    image.jpg
    110.6 KB · Views: 37

Recent Posts

Top