K.E.C. Darkside

Did you test these on fireformed cases? I trashed some ADG cases and thought I was good. Loaded the same load and was way to hot and...

This. I have loaded for a bunch of 300WMs w. 210-215s. Almost all are in the 75.5-77.2gr H1000 @ 2930-2990 from 26" barrels.

I've never had a book line up with anything! Looks like your experience is lining up with that too.

Sometimes ya luck into a fast barrel.

Howdy, you are right there with what I have with the same rifle. With only around 80 shots on my barrel, so I believe it will get a...

You could ask any bullet makers with their reloading manuals and probably get the same response.

It wouldn’t have made a hoot of difference if you did. As to your velocity, I have 5 300WM rifles, all of them get 2950-2990fps with...

For now I still like my Wm, RUMS, and Weatherby Mags. Someday my 308 base cartridges will become my favorite. 🎅

"No replacement for displacement".

I have Starline brass that did the same thing. It's fine so far. Probably the make up of there brass.🎅

Need quite a bit of freebore.

H4831SC is faster burning. #137 H4831/H4831SC #152 H1000 I would look at what charge weights are for each of the powders for a...

you probably have several pounds of the 1000, blend them all. Rock On!

I seen that also. 🤣🤣🤣🤣🤣🤣🤣 That would GUESSING be about 12" long bullets. Merry Christmas. 🎅

This ^^^^^^^^^^^^ Without any Extra Cost. 🎅