Lapua short mag brass

HoytFlinger

Well-Known Member
Joined
Aug 14, 2011
Messages
296
Location
Lexington, KY
I sent an email to Lapua pretty much begging them to start making 7mm WSM brass. Today they emailed me back and said they have been getting a bunch of requests but they were mostly for 7mm RSAUM and they haven't made a decision yet. Why do you think the RSAUM has that many more requests than the 7mm WSM? Is it any better?
 
This article might answer your questions:
7mm Cartridge Guide

The only thing I can think of is that many consider the WSM a little too much capacity/too short of barrel life. The SAUM is a bit smaller, and Norma offers the brass.
Not that there is anything wrong with WSM or SAUM, but I can't picture either being a big seller for Lapua compared to their current offerings.
And they can't make brass for everybody, and every fly-by-night cartridge.
 
7mm bullets are popular in some shooting sports.

I'm a little surprised that they don't make brass for any of the 7mm's as best I can tell.

If they do start producing for the SAUM, it'll definitely move up a notch or two on my wish list.

Then again, my purchases aren't going to get them terribly excited.

-- richard
 
HoytFlinger,

Simple; because the RSAUM is the round that most of the competitive shooters seem to have gravitated towards. For both the F-Class and LR teams, they standardized on this cartridge during the recent world shoot to make wind calls a bit easier for the coaches (that is, not having to dope wind for two shooters firing distinctly different gun/bullet combinations) during the string. Can't tell you exactly why they went to the SAUM over the WSM, but for the 7mm version, that's the round that got the nod. From what I'd heard, this wasn't the US teams idea, but that we'd got it from the Brits. The apparently used this combination last year and have been doing very well with it in competition. Anyway, that's where things are headed right now.
 
Ron,

Sorry, but I'd have to say pretty slim right now. It'd be a new draw for us from the ground up, as we don't have any other cases that utilize this head size. Right now, as I'd mentioned previously, we're taking a lot more requests for the 7mm SAUM. If, and that means "IF", we go this route, I suspect that would be the first one we'd make. Be happy to keep you posted as I hear more.

In the meantime, anyone who's going to the SHOT show, stop on by! The Finns will be here, and you can talk with them directly about new cartridge suggestions. And yes, they really do pay attention to US market requests.

See you there?
 
I email them about every 6 months about 300 RUM brass........... please please please.

I guess if I had the market setup for the 338 LM I might not rush to make RUM brass. If I was an american manufacturer I might look at the drool on all the lapua brass and decide to make a decent product...... sorry, had to rant a second

Count me in on the WSM bandwagon also though
 
Where I'm from in Wyoming, the 7 saum is a very popular with long range shooters. The 180 bergers at 2950 make the 7 saum a great long range rifle.lightbulb
 
How about the 300 WSM, the 30 cal version would have to be getting popular with both target shooters and hunters, any likelyhood of 300 WSM from Lapua?
 
Ron,

Sorry, but I'd have to say pretty slim right now. It'd be a new draw for us from the ground up, as we don't have any other cases that utilize this head size. Right now, as I'd mentioned previously, we're taking a lot more requests for the 7mm SAUM. If, and that means "IF", we go this route, I suspect that would be the first one we'd make. Be happy to keep you posted as I hear more.

In the meantime, anyone who's going to the SHOT show, stop on by! The Finns will be here, and you can talk with them directly about new cartridge suggestions. And yes, they really do pay attention to US market requests.

See you there?

Any updates on possible 7mm SAUM/WSM brass from Lapua?

Thanks
Richard
 
Ron,

Sorry, but I'd have to say pretty slim right now. It'd be a new draw for us from the ground up, as we don't have any other cases that utilize this head size. Right now, as I'd mentioned previously, we're taking a lot more requests for the 7mm SAUM. If, and that means "IF", we go this route, I suspect that would be the first one we'd make. Be happy to keep you posted as I hear more.

In the meantime, anyone who's going to the SHOT show, stop on by! The Finns will be here, and you can talk with them directly about new cartridge suggestions. And yes, they really do pay attention to US market requests.

See you there?

Kevin,

Any news on this?

Thanks,

Mark

PS, would really love to see some 300 RUM brass as well
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top