X 2Never for me, but you know about Murphy's law. Proceed with caution and care anytime when reloading.
X 2Never for me, but you know about Murphy's law. Proceed with caution and care anytime when reloading.
I modified my Grip n Pull with a broken shovel handle so it's easier on the hands. Even though it may scuff the bullet a little sometimes, it never affected my accuracy out to 1000 yds from my 6.5 Creedmore and 300WM.Frankford arsenal hand de primer
Grip-n-PullView attachment 498114
I screwed up 20 rounds. I need to pull bullets, dump powder, and de-cap unfred primers. Who makes the best bullet puller and how do I de-cap unfired primers? Thanks
I have never had that problem beforeI've tried re-sizing primed brass after pulling bullets before, it frequently results in the primer being partially ejected. Then you can't get the brass out of the shell holder without removing the primer, you end up having to remove the primer anyway. Easier to just get them all out and be done with it. You might be able to just neck size them, but not full length sizing.
Glad it's only 20. De-priming live primers is always risky. No manufacturer is going to tell you how to de-prime live primers. Full face shield, gloves, and ear plugs are mandatory. Go slow and take your time. If your only doing 20, any of the hammer type pullers will suffice for the job, not expensive. Invest in a collet puller if you have a big pile full to do. BTW, you'll have to resize the brass after you de-prime and pull the bullets. Check the case necks carefully for splits. You may have to trim the cases as they have a habit of stretching when you bull the bullets.The brass stretchs and deforms during the removal processes. I've done this dance for 1500 pieces of unfired LC brass I bought a couple of years ago from a contract cancelation. Only lost 4 cases during the pull down. Just be careful.I screwed up 20 rounds. I need to pull bullets, dump powder, and de-cap unfred primers. Who makes the best bullet puller and how do I de-cap unfired primers? Thanks
I bought both pairs... can't get the mag set to pull a feather!I modified my Grip n Pull with a broken shovel handle so it's easier on the hands. Even though it may scuff the bullet a little sometimes, it never affected my accuracy out to 1000 yds from my 6.5 Creedmore and 300WM.