Go-to 6.5 Creedmoor ammo

Had great results with both the following:
- 120gr Nosler BT, very soft shooting load for my kids at ~2820fps (got the same speed with both Varget and H4350)
- 143gr ELD-X over RE16, I used this as a dual purpose match and long range hunting load, I was running as high as 2891fps at one point but ES/SD would get weird in hot temps so I backed off to the next lowest node and never had another issue, furthest shot to date with that load was 540yds, no issues with bullet performance, havent gotten a chance to try further
 
99 HH, 43.6 Varget. Lapua brass. Winchester large rifle primers. 3359 FPS. Sauer Field Shot. 26 inch tube. I switch back and forth with this and CA Arms Ridge line 7-08 using 120 HH at 3180. Also using Varget.
 
Believe it or not, 37.1 grains of RL-15 under a 130 Accubond or 42.5 grains H4350 under a 120 Barnes Tipped TSX. This is for my Weatherby Altitude that my son now seems to think is his.
 
Just for laughs, I've been shooting the 85gr Hammers at 3,700 ft/sec. 47.1gr of Varget will get me there in a 26" bbl. I don't see traditional pressure signs in this rifle but it is NOT a good place to start in any other rifle. FWIW - I'm using Lapua SRP brass and CCI450 primers. Jump is .213".
 
Hornady brass, H4350, CCI250 and 140 Berger HVLD. I hunt with this load. It shoots well enough that I shot a F-class type match with it.
 

Recent Posts

Top