Sockeye66

Get it off the Lead Sled. Those suck. Try different ammo. Don't discount Berger 140 Elite ammo. Those bullets rock.

Did you check your action screws? Are you running a muzzle device? Is it loose? Assuming factory ammo, not reloads?

I've shot plenty elk with the 6.5 PRC and 7 SAUM to know either works well. It's always funny to hear the 6.5 PRC isn't "enough" while...

Last summer I went to Africa on a safari. The guide would not let me hunt without a suppressor. I was shooting a 300 WM. He spun off the...

Scopelist or eurooptic are usually my go to

I know what you mean. I, too, prefer personal checks as payment but always offer to keep the item until the check clears. I did the same...

IMO might as well do a 100% percent clean up since you're already doing the work. but a skim turn is fine also. If your cutter matches...

My Tikka T3 stainless 6.5x55 has set for years. Had worked up a couple loads, but never hunted it. Still like new. So broke down &...

With the improved cases, You need either a crush fit with the brass in the chamber, and/or jam the bullets to get consistent ignition...

I didn’t really know, just an assumption based on standard twist rate for .270 WSM.

As I see it, the advantage the 6.8 has over the 270 WSM is the ability to stabilize heavier bullets. Your finished product would be a...

The 6.5-284 has been extremely successful for long range competitions since the'90s and it has a rebated rim. I have one F-Class rifle...

I’ve used an Apache from Harbor Freight for the past 5 years and it’s held up well to some serious use, I did replace the pull apart...

Which reticle and what brand of mount?

If it's a suppressor adapter BRAKE, it is most likely installed with Rockset. Soak in water to loosen Rockset, it is designed for high...