Just to update as there seems to be very little info on the 7mm CE bullets, and to bump. I got a hundred of the 160gr. I figured I would need 50 or so for load development.
The first thing I noticed was these are longer than the 168 Berger VLDs. I started 1 grain under my VLD accuracy load with H-4831sc and went up in half grain increments. I seated bullets to CEs recommended length. I loaded 4 different loads (3 of each) and shot at 333 yards.
First group shot a 1.68" group. Next two groups were just under 3", still under 1 moa at 333 yards. The highest load had a sticky bolt so I only shot 1 of them.
I loaded up 10 more of the very first load. I shot 3 at 100 yards to chronagraph again. Wowsa! One hole about .320 outside.
Shot 4 more at 333. Had a 3-7mph cross wind this time so I held 1 moa for wind. 3 shots were under a half inch with the 4th about an inch right opening the group up to 1.4". Vertical spread was .75" at 333 yards.
So my load ended up 63.5 gr h-4831sc at 2940fps. My VLD load is 64.5 gr H-4831sc at 2900. Great thing is they have the same point of impact all the way out to 428 yards (according to ballistic program they should track the same to 1000 yards!) I haven't shot these past 428 yet due to the extreme fire hazard in my long range shooting spot. If I shoot both at the same paper target you can tell which bullet is which because the CEs don't leave a black circle.
So far I am blown away with the accuracy of these bullets and can't wait to try on game this fall.
Testing was done in a custom 7mm rem. It took way more rounds to get the VLD load where I want it. After this season I'd like to try these at max velocity with H-1000 or Retumbo. I'll stick with max consistency for now!