I have developed a few loads for mine, all with CCI 250 primer.
200gr partition 66gr IMR4831
180tsx 71gr RL19
180 Nos BT 71.5gr RL19
200 Accubond 65gr IMR4831
220 gameking 64gr RL19
I use the 200 accubond for everything, it seems to be about the best all around bullet. I have shot a blackbear and 5 whitetails, all under 75 yards nothing that really tested bullets, but the bear was shot at 14 feet. The round was a 180tsx which went from the left shoulder through to the skin on the right ham, only hitting the shoulder plate an a rib for bone. The deer were all shot with either the 180BT or 200 AB, pretty much bang flops but all were shot up close.
The 325 seems to be a pretty effective caliber. The 180 BT is quite a bit tougher than the smaller caliber BT, the copper jacket is tapered and fairly thick from mid bullet back. I am going to give the 160gr TTSX a go next. It looks like it should be pretty good out to about 300 yards.