C CHARLIEDUECE65 Well-Known Member Joined Jan 23, 2009 Messages 275 Location MN Dec 26, 2010 #1 Can i use the 300 norma brass for this round instead of the 338 norma brass. And what is the difference between the 300 jazz and the 300 Norma. Thanks
Can i use the 300 norma brass for this round instead of the 338 norma brass. And what is the difference between the 300 jazz and the 300 Norma. Thanks
G geargrinder Well-Known Member Joined Nov 6, 2006 Messages 2,024 Location Dayton, Nevada Dec 26, 2010 #2 There is no such thing as 300 Norma brass. 300 Norma is basically the same thing as a 300 Jazz. They are both made from 338 Norma brass. The 300 Jazz is 308nate's version. Maybe you are confusing it with 308 Norma Mag which is a completely different animal. Very similar to a 300winmag.
There is no such thing as 300 Norma brass. 300 Norma is basically the same thing as a 300 Jazz. They are both made from 338 Norma brass. The 300 Jazz is 308nate's version. Maybe you are confusing it with 308 Norma Mag which is a completely different animal. Very similar to a 300winmag.
B bigngreen Well-Known Member Joined Nov 24, 2008 Messages 8,830 Location SW Montana Dec 26, 2010 #3 Midway has 300 Norma mag brass. Norma Reloading Brass 300 Norma Magnum - MidwayUSA Should make some of the smaller wildcats easier!
Midway has 300 Norma mag brass. Norma Reloading Brass 300 Norma Magnum - MidwayUSA Should make some of the smaller wildcats easier!
G geargrinder Well-Known Member Joined Nov 6, 2006 Messages 2,024 Location Dayton, Nevada Dec 26, 2010 #4 My mistake. I see that they have been selling the brass for a few months now. I would guess that the difference between the two should be minimal. The 300 brass should be better to form from. You'd have to ask Nate what the exact differences are.
My mistake. I see that they have been selling the brass for a few months now. I would guess that the difference between the two should be minimal. The 300 brass should be better to form from. You'd have to ask Nate what the exact differences are.
C CHARLIEDUECE65 Well-Known Member Joined Jan 23, 2009 Messages 275 Location MN Dec 26, 2010 #5 Thanks, i was just wondering about the brass, i knew they made it. i also saw it on brunos website, im sure now, i would just use either die set to make one or the other cartridge.
Thanks, i was just wondering about the brass, i knew they made it. i also saw it on brunos website, im sure now, i would just use either die set to make one or the other cartridge.