Trnelson
Reaction score
444

Profile posts Latest activity Postings About Post areas

  • What rifle is your 264 win with the eldX load? Care to share the data?
    Trnelson
    Trnelson
    26" Winchester 70 extreme sporter. I have 96 pieces of Nosler brass and have six firings on them. I anneal at every firing. Using Norma 217 powder. Started at 64g, worked up to 70g settled at 68g. Using Winchester LR magnum primers. I see 3,068 f/s and get a SD of 8 as measured by my magnetospeed. ELDX needs to be sorted for bearing surface or your SD will just suck.
    I saw in a post that you are shooting the 6.5 Grendel with the 130 Berger. What barrel length and what load are you using. I have two AR Grendel's one 18" and the other 20". I have just started to work with them and experimenting with different powders and bullets. I would appreciate any help. Oh, I am a very experienced hand loader 40+ years so I know to start low and work up to any loads.
    Trnelson
    Trnelson
    As far as the load I'm shooting, I worked up to 26.1g of IMR 8208xbr with the heavier 7.62x39 cases and the 130g berger ar hybrid. Velocity is 2,403 FPS with an SD of 4 via a magneto speed.
    Let me know if I can help any more.
    Trnelson
    Trnelson
    My rifle has an adjustable gas block, H3 buffer and a machine gun recoil return spring. I smoothed out and polished the feed ramp to alleviate the gouging I was getting on the neck of the cases.
    Trnelson
    Trnelson
    20" barrel with a Specwar 7.62 suppressor.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top