elkaholic
Well-Known Member
Its becoming very popular with ADG head stamped brass. Shoots bugholes with Hornady factory ammo too.Thanks. Sound like a real winner.
Its becoming very popular with ADG head stamped brass. Shoots bugholes with Hornady factory ammo too.Thanks. Sound like a real winner.
Was that 212 or 225?Here is hornady 300 prc factory ammo out of my 30 sm View attachment 184052
Mine is 3.78 at 20 though off.What kind of coal are you looking at with the 245's. A 30 SM is one of next on my list of builds just putting together info. Thanks
225Was that 212 or 225?
84.8 ran 3021. Did not get a read on 85 but it had a slight ejector mark.
View attachment 184127
For the ignorant, please forgive me:
300 prc factory loads can be fired out of a 30sm chamber?
Where can I get a 30sm reamer?
30sm can accurately fire 245eol's @3000fps out of what twist barrel?
Would a 28" or 30" proof barrel be beneficial here?
This might be my dream 30cal!
Thanks Brice
For the ignorant, please forgive me:
300 prc factory loads can be fired out of a 30sm chamber?
Where can I get a 30sm reamer?
30sm can accurately fire 245eol's @3000fps out of what twist barrel?
Would a 28" or 30" proof barrel be beneficial here?
This might be my dream 30cal!
Thanks Brice
Yes, you can fire factory prc factory ammo very accurately.
The longer barrels will help, to a point.
We need to test more with the 245's to find accuracy nodes but with a 30", I would not be at all surprised to find accuracy at 3000'.
A 9 twist will work well. Some folks are building 8 twist for very long bullets.
You can purchase Reamers, dies, and head stamped brass from my website at:
shermanwildcatcartridges.com
Call if you have questions......Rich