.284 Hart barrel help

[elkslayerjc]

So I ordered a .284 Hart barrel in a #4 contour fluted. I had a 280 ackely improved built and as i was breaking in the barrel I noticed chamber chatter on my brass. I contacted the smith and brought back the barrel and he did the right thing by ordering a new barrel. So here is my dilemma, I have a great barrel sitting there that shoots 5 shot groups that I can cover with a dime and I am wondering what I can build on this barrel. I have been kicking around the idea of a 7mm ultra mag or just a 7mm but I am into things that most people don't have. I am looking at a deer rifle for a 1000 yards. Im sure someone out there has some ideas, so any would be helpful.

Thanks

 

[rickiesrevenge]

Could you set it back and rechamber it? I realize that there's a good chance you'll still have chatter.


Aaron

 

[Slaysesh]

Well name your price and you can sell the barrel to me :D:D

 

[Lefty7mmstw]

hang it on a mag. action punch and punch the bbl. to 7stw, 7x300win, or 28 nosler... any of those will clean her up very well...

 

[elkslayerjc]

Thanks for the info lefty,
what is the difference between the 28 nobler and the standard 7mm ballistically. I have a 7mm and I run the 160 accubonds. How do these compare with the same bullet?

 

[Lefty7mmstw]

Thanks for the info lefty,
what is the difference between the 28 nobler and the standard 7mm ballistically. I have a 7mm and I run the 160 accubonds. How do these compare with the same bullet?

The 28 Nosler will hang in there with the 7stw and 7rum... It is a couple hundred fps faster than the 7rem at equal pressures