.270 Barnes TSX Tipped

Discussion in 'Reloading' started by Limitcontaminater, Jul 13, 2015.

  1. Limitcontaminater

    Limitcontaminater Member

    Messages:
    8
    Joined:
    Feb 3, 2015
    Anyone have a good load for Barnes TSX tipped? This will be my first time loading lead free. I'm loading them for my ruger m77 in .270 win. Thanks
     
  2. aj427ci

    aj427ci Well-Known Member

    Messages:
    113
    Joined:
    Nov 16, 2013
    Following
     
  3. Shortmagman

    Shortmagman Well-Known Member

    Messages:
    463
    Joined:
    Feb 22, 2008
    Here is the load that shoots great out of my Weatherby Vanguard in 270 Win.. 130 TTSX, RP cases, BR2 primers and 54.0 grains of H4350. This is close to a max load so start lower and work up. Also follow Barnes's instructions about how far to load off the lands. Start 50 thousands off and this load should work for you.
     
  4. Shane Lindsey

    Shane Lindsey Well-Known Member

    Messages:
    507
    Joined:
    Jul 13, 2010
    Win Cases
    CCI 200
    57.5 Gr H4831 SC.
     
  5. Limitcontaminater

    Limitcontaminater Member

    Messages:
    8
    Joined:
    Feb 3, 2015
    Thanks guys. I think I'll try the H4831 load first because I l already have a bunch of it.
     
  6. Chino Tom

    Chino Tom Active Member

    Messages:
    30
    Joined:
    May 3, 2014
    I worked up to 59gr of H4831SC for my Tikka T3 22" barrel. Nosler and
    Federal brass, Rem 9 1/2 primers. Chrono at 3025 Avg. My rifle likes
    this load. Under 1 moa (@ 100).
     
  7. bruce_ventura

    bruce_ventura Well-Known Member

    Messages:
    1,106
    Joined:
    May 22, 2011
    My load is similar, just a few tenths more charge. 2930 fps from my sporterized Mauser (24" barrel) RP cases with Fed210 primers. 5 shot groups are under 1" at 100 yds.