6x47 or 6.5x47 lapua

Weblake

Active Member
Joined
Dec 14, 2011
Messages
41
I was wondering if someone a little more knowledgeable about the 6x47 and the 6.5x47 could tell me the ups and downs to both rounds. I will be shooting coyotes bobcats and whitetail will be the largest game I will be shooting with it. Which would be a better round?
 
I would say that you would be better off with the 6.5. I shoot the berger 130s at 2910 fps and the 123s at 3010 fps, also you will get better barrel life, the 6 is a great round also but the barrel lifeis not as good, you will need a 7 twist to shoot the 115 bergers,no problem shooting a deer out to 600 yrds but you could stretch the 6,5 with 130 bergers out to 900 yrds easy the 123s are hard on coyotes out to 850 for sure, I have a buddy that shot a 6x7 bull elk at 720 yrds with the 123s and another buddy that shot a cow at 850 yrds with the 130 bergers . both were 1 shot kills. Good luck
 
I just got a 6.5x47 Lapua today in the mail, for a dedicated wolf and coyote rig. Now to find the best powder..
 
I'm going with the 6.5x47 with a b&c a2 stock, a lilja 26" fluted #7 contour barrel, Jewell trigger on a 700 action. Can anyone tell me close to what it will weigh?
 
?? No guesses on weight. Is there a way I can figure out how much it will weigh before building the rifle?
 
If you are going to go after whitetail beyond 350-400 yards, I would choose the 6.5x47 because of the better bullets available for that cartridge.

If you are looking at 6.5mm cartridges, then I think you need to consider the 6.5 Creedmore as well. I have several friends in Pa., who shoot the creedmore out to and beyond 1,000 yards, and have uniformly found them to be stunningly accurate.

I have a 6x47, and run 115 DTACs. I love it. It is one of the most accurate rifles that I own. Not to mention its recoil is almost nonexhistant. But if I went 6.5mm, it would be 6.5 Creedmore.

Jeffvn
 
What r the fps differences in the creedmore and the 47 lapua given the same size bullet and the same brand of powder?
 
The CM is a touch longer than the 47L giving it 3.5gr more capacity. You can run the numbers in QuickLoad to see the potential difference.
BUT, the CM uses a large primer instead of a small primer(like the 47L). So it might not actually survive so well with comparable competitive loads used with the 47L.
BUT, for colder hunting, I would prefer the large primer to lite that capacity. And the CM capacity is more inline with needed for ~139-140gr bullets(only ~123-130gr for the 47L).

They are both excellent mid-range cartridges(by design) that are sparsely stretched to 1kyd for some reason. But that'll fade away to 260s soon -in 26cal..
IMO, the 6x47L is superior to both at 1kyd, matching the 6Dasher(a real, multi-record holding 1kyd cartridge).
I think the 6x47L will be a very successful 6mm in 1kyd competitions.
 
The CM is a touch longer than the 47L giving it 3.5gr more capacity. You can run the numbers in QuickLoad to see the potential difference.
BUT, the CM uses a large primer instead of a small primer(like the 47L). So it might not actually survive so well with comparable competitive loads used with the 47L.
BUT, for colder hunting, I would prefer the large primer to lite that capacity. And the CM capacity is more inline with needed for ~139-140gr bullets(only ~123-130gr for the 47L).

They are both excellent mid-range cartridges(by design) that are sparsely stretched to 1kyd for some reason. But that'll fade away to 260s soon -in 26cal..
IMO, the 6x47L is superior to both at 1kyd, matching the 6Dasher(a real, multi-record holding 1kyd cartridge).
I think the 6x47L will be a very successful 6mm in 1kyd competitions.

You say you like the 6x47L, which it doesn't really matter to me which one I use but I do want to try to shoot deer out to 5-6 or maybe strech a 700 shot also, will the 6mm have enough power for that. I am not really looking for a competion rifle. I just don't want the average 308 or 270 is why I want to build a 6.5x47.

If you think there is a better long range accurate cartridge out there that would also be decent for whitetail I would be interested in it but I have to build it on a SA 700 being as that is what I already have. Any opinions would be great.
 
I no this is off topic of the 6.5 but could I build a 300 wsm off my 22-250 platform that I have? Is so would y'all recommend it or just quit thinking about it so much and just have a 6.5 built?
 
I would not recommend it.
The WSM needs a magnum diameter action so that you get enough barrel steel around the chamber to allow respectable loads without extraction problems.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top