xBolt Speed 7mmRM

[MH WASH]

I'm considering getting one of these in the Suppressor Ready model. Mostly interested in shooting 180s. My concern is whether or not the magazine is long enough for me to seat the 180 grain bullets out far enough that they are not cutting into the powder capacity.

 

[Reemty J]

Measure the maximum length the clip allows in a gun store

 

[victor3ranger]

Let me know how it does, I have the hells canyon long range

 

[cohunt]

Let me know how it does, I have the hells canyon long range

You should be able to measure the mag for the op then

 

[Philward]

3.6" max COAL in the x-bolt mag.

 

[meatyrem]

I'm considering getting one of these in the Suppressor Ready model. Mostly interested in shooting 180s. My concern is whether or not the magazine is long enough for me to seat the 180 grain bullets out far enough that they are not cutting into the powder capacity.

I would also look into the twist to see if it will stabilize the 180's

 

[Philward]

True, the speed version may not be 1 in 8 twist. I know the long range versions do have a fast twist.

 

[Philward]

I'm considering getting one of these in the Suppressor Ready model. Mostly interested in shooting 180s. My concern is whether or not the magazine is long enough for me to seat the 180 grain bullets out far enough that they are not cutting into the powder capacity.

You're in luck, the suppresor ready speed is an 8 twist barrel, 22".

 

[MH WASH]

You're in luck, the suppresor ready speed is an 8 twist barrel, 22".

This is why I'm interested in it.