I'm settled on building a 30 Nosler built on a Stiller action. Just trying to decide on what scope to put on it. I think I've narrowed it down to either the Nightforce SHV 5 - 20 IHR reticle or the Zeiss Conquest HD 5 - 25 z-plex reticle. As this will become my new hunting rifle, I will shoot plenty of targets with it and try to become a sufficient long range shooter as well. I am planning on having custom turrets built for it after a load is developed as well. Any suggestions or opinions will be greatly appreciated.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
What scope would you purchase?
- Thread starter WestCo
- Start date
Help Support Long Range Hunting Forum
marioq
Well-Known Member
No experience with Other but night force has my vote all day long. I have several!!!
On scopes, with that kind of power, intended for long range shooting, I would choose a MOA reticle. That can only be had with the Nightforce. If I were looking for a holdover BDC type reticle, then I would choose the Zeiss with the Rapid-Z reticle.
With a MOA reticle you can measure groups from a distance with it. As in, it is easy to tell of your long range groups on steel or rocks is less than MOA or not. And can measure the correction needed for your next shot.
Also, would not get the custom turrets. They will only be accurate for one bullet and load in one particular set of weather conditions and or altitude. I just think they are more trouble than they are worth. Besides I like to play around with different bullets tooo much...
With a MOA reticle you can measure groups from a distance with it. As in, it is easy to tell of your long range groups on steel or rocks is less than MOA or not. And can measure the correction needed for your next shot.
Also, would not get the custom turrets. They will only be accurate for one bullet and load in one particular set of weather conditions and or altitude. I just think they are more trouble than they are worth. Besides I like to play around with different bullets tooo much...
Danehunter
Well-Known Member
Definitely the Vortex Razor AMG. As far as i know EVERY part is Made in USA, even the excellent glass. If you have a Stiller action then you need a scope of equal quality.
The Vortex Razor AMG is fairly light for what it does and for the quality even though it's not by any means the lightest. Vortex has built a separate manufacturing facility within their plant for AMG scopes. And they have patented a special reticle lens "carriage" that takes up less room inside the tube to give more adjustment for windage and elevation.
Yeah, there are several excellent scopes on the market but I feel that only Schmidt & Bender is better than the Vortex Razor AMG and only by a bit.
The Vortex Razor AMG is fairly light for what it does and for the quality even though it's not by any means the lightest. Vortex has built a separate manufacturing facility within their plant for AMG scopes. And they have patented a special reticle lens "carriage" that takes up less room inside the tube to give more adjustment for windage and elevation.
Yeah, there are several excellent scopes on the market but I feel that only Schmidt & Bender is better than the Vortex Razor AMG and only by a bit.
FearNoWind
Well-Known Member
Forgive the duplication .....
FearNoWind
Well-Known Member
Your question was "What scope would you purchase?"
Nightforce SHV 5 - 20 IHR reticle
There are other scops with other setups that I might suggest but that wasn't your question.
soundwaves
Well-Known Member
+ 1
