What Gun Powders are ACTUALLY manufactured in the United States ?

jdyoung

Well-Known Member
Joined
Mar 1, 2020
Messages
596
Location
Ironman Country
What gun powders are manufactured in the United States ? I don't mean where the corporate heads are located. But where are the actual factories/manufacturing plants ?
Around 1996 , I was in my favorite gun shop/ sporting goods store, buying reloading supplies. The conversation with the salesman got around to cleaning firearms. I commented that I was having a tougher time cleaning my '06 . Salesman asked if I was using the powder I purchased that day, IMR4350. Yep, I said, groups are fine, barrel just requires more cleaning. He informed me of Dupont's sale of the gunpowder manufacturing and how US regulations required that when those factories were sold, they had to move the actual manufacturing process outside of the United States. He talked about not being able to trust that the components chosen to make the product outside the US would be of the same quality, not burn as clean for example. He suggested I try RL19. I did, and the increasing barrel cleaning problem subsided.
I've been watching a couple of threads here that have evolved into the question of whether one can buy the same powder as loaded in factory ammunition. They caused me to recall the above old conversation.
So , again, anybody know where the ACTUAL Gun Powder Manufacturing Factories are located ?
 
Reloader powders were made in Sweden, this has changed somewhat. Nearly all of Hodgdon's powders are made in Australia, Winchester powders were being made by StMarks, do not know if this is still the case.
DuPont were being made in France, this also may have changed.
It's a gamble these days as manufacturing keeps moving around the planet.
I do KNOW that ADI makes ALL the stick type single base and flake type double base powder for Hodgdon. Just the designation changes when in the US over what they're called here in Australia.

Cheers.
 
Ok, I did some sleuthing around on the Internet and found the article shown below. Don't know who the is the author, but it confirms what Magnum Maniac and Jerry M wrote above. The year it was written , 2016.

St, Marks Florida. It's the onetime Olin Corp plant, now part of General Dynamics. It makes double-based ball powders only or those (Such as Hodgdon Hybrid 100V and some Alliant types) using the same slurry / distillation based process.

All Winchester and Hodgdon ball / 'spherical' grades are supplied by St. Marks as are nearly all propellants used in US military small arms ammo, the US government having decided way back in the 1950s with 7.62 adoption that this type would be the norm, sniper and special purpose ammo aside.

Ramshot / Accurate ball powder comes from PB Clermont in Belgium. Hodgdon extruded grades and IMR-8208 XBR from Thales / ADI in Mulwala, NSW, Australia. Other than 8208 XBR, IMR extruded rifle powders are also made by a General Dynamics Corp owned plant in Valleyfield, Ontario, Canada. (Hodgdon owns the IMR brand name and marketing rights IIRC.) This plant also makes some Accurate brand extruded numbers. All Vihtavuori powders come from the town of that name in Finland.

Alliant 'Reloder' extruded grades were all made by Bofors in Sweden until a few years ago, but some recent additions such as Re17 and Re33 are sourced from Nitrochemie Wimmins AG in Switzerland. Alliant has also started using spherical grades from St. Marks.

Health & Safety and the EPA is the primary reason that all extruded powders are made outside of the USA. Ball types manufacture uses non-inflammable / explosive slurries with material piped between processes until the little balls are distilled out at a late stage for chemical treatments and grading. This method also allows old out of date propellants to be recycled alongside fresh ingredients reducing costs.

Extruded powders start by dissolving cellulose in powerful acids, a dangerous exothermic process and whose products are immediately highly explosive and inflammable, then further inherently dangerous processes and solvents are used to convert 'guncotton' into usable propellants. Many of the materials used are corrosive and toxic, likewise creating waste and pollution issues that have to be dealt with nowadays, not just dumped into waste ground or rivers as would once have been done.

All this makes the manufacture of this type inherently riskier which in this day and age is also much more expensive. A guy in the handloading powder business stated years ago that the EPA hadn't banned extruded powder manufacture, but its regulations were so onerous that any such produced in the country, (USA), would be so expensive, nobody would buy them.


Extruded propellants are widely manufactured in Europe still, although many older plants have closed over the last 20-30 years. None at all are manufactured in the USA since the DuPont Corporation firstly moved propellant production to Canada then later sold that operation. No doubt, the American military's decision to switch to ball propellants was a major influence here as military demand is the largest single component of many explosive manufacturers' business. Nevertheless, the US market for sporting ammunition and her industry's manufacturing outputs probably exceeds all of that of Europe combined.

Yes, I know Europe has high safety and environmental standards - the UK has not manufactured propellants since the ICI Nobel plant in Scotland closed in the late 1980s or early 1990s. However, there is a big difference between having exacting regulations and having such that are so onerous that there might as well be a complete ban which is what my contacts in the American handloading powders business have told me about the EPA's attitudes to manufacturing this (extruded) form.

One area where the EC is becoming more restrictive than the US is fast appearing though. That is the EC REACH program which is steadily evaluating every chemical used and identifying risks to human health, then legally forcing their replacements with safer alternatives.


It is known that some traditional chemical burning rate deterrents and other such behavior modifiers long used in small arms propellants are deemed to be in the dangerous category, so many long established powders are now living on borrowed time. A little commented on element of the blurb about the new IMR Enduron powders is that they are 'environmentally friendly'. It actually goes a bit further than that as many existing powders will not be allowed to be sold in EC countries in a very few years time, nor will ammunition loaded with them. General Dynamics / IMR is getting itself geared up to this challenge with its new products. Once the new regulations start to apply no older long established IMR grades will be compliant, that also applying to many other makes. I don't know how this affects many existing European manufacturers other than Nitrochemie whose powders are already compliant, but I wouldn't be at all surprised if this doesn't sound the death knell for some as there is substantially more capacity than demand for powders, given the lack of wartime requirements, but western governments have long since stopped worrying about that.

So far at any rate, there seems to be no US equivalent to REACH in this field, so many older propellants will continue to be sold in this market, likewise loaded ammunition.
 
Last edited:
The Reach regulations are in effect. All of the ADI powders are not Reach compliment as last I could determine. I think all of the St Mark's are not in compliance. As noted above the only GD that are compliant are the Enduron powders.
 
Ok, I did some sleuthing around on the Internet and found the article shown below. Don't know who the is the author, but it confirms what Magnum Maniac and Jerry M wrote above. The year it was written , 2016.

St, Marks Florida. It's the onetime Olin Corp plant, now part of General Dynamics. It makes double-based ball powders only or those (Such as Hodgdon Hybrid 100V and some Alliant types) using the same slurry / distillation based process.

All Winchester and Hodgdon ball / 'spherical' grades are supplied by St. Marks as are nearly all propellants used in US military small arms ammo, the US government having decided way back in the 1950s with 7.62 adoption that this type would be the norm, sniper and special purpose ammo aside.

Ramshot / Accurate ball powder comes from PB Clermont in Belgium. Hodgdon extruded grades and IMR-8208 XBR from Thales / ADI in Mulwala, NSW, Australia. Other than 8208 XBR, IMR extruded rifle powders are also made by a General Dynamics Corp owned plant in Valleyfield, Ontario, Canada. (Hodgdon owns the IMR brand name and marketing rights IIRC.) This plant also makes some Accurate brand extruded numbers. All Vihtavuori powders come from the town of that name in Finland.

Alliant 'Reloder' extruded grades were all made by Bofors in Sweden until a few years ago, but some recent additions such as Re17 and Re33 are sourced from Nitrochemie Wimmins AG in Switzerland. Alliant has also started using spherical grades from St. Marks.

Health & Safety and the EPA is the primary reason that all extruded powders are made outside of the USA. Ball types manufacture uses non-inflammable / explosive slurries with material piped between processes until the little balls are distilled out at a late stage for chemical treatments and grading. This method also allows old out of date propellants to be recycled alongside fresh ingredients reducing costs.

Extruded powders start by dissolving cellulose in powerful acids, a dangerous exothermic process and whose products are immediately highly explosive and inflammable, then further inherently dangerous processes and solvents are used to convert 'guncotton' into usable propellants. Many of the materials used are corrosive and toxic, likewise creating waste and pollution issues that have to be dealt with nowadays, not just dumped into waste ground or rivers as would once have been done.

All this makes the manufacture of this type inherently riskier which in this day and age is also much more expensive. A guy in the handloading powder business stated years ago that the EPA hadn't banned extruded powder manufacture, but its regulations were so onerous that any such produced in the country, (USA), would be so expensive, nobody would buy them.


Extruded propellants are widely manufactured in Europe still, although many older plants have closed over the last 20-30 years. None at all are manufactured in the USA since the DuPont Corporation firstly moved propellant production to Canada then later sold that operation. No doubt, the American military's decision to switch to ball propellants was a major influence here as military demand is the largest single component of many explosive manufacturers' business. Nevertheless, the US market for sporting ammunition and her industry's manufacturing outputs probably exceeds all of that of Europe combined.

Yes, I know Europe has high safety and environmental standards - the UK has not manufactured propellants since the ICI Nobel plant in Scotland closed in the late 1980s or early 1990s. However, there is a big difference between having exacting regulations and having such that are so onerous that there might as well be a complete ban which is what my contacts in the American handloading powders business have told me about the EPA's attitudes to manufacturing this (extruded) form.

One area where the EC is becoming more restrictive than the US is fast appearing though. That is the EC REACH program which is steadily evaluating every chemical used and identifying risks to human health, then legally forcing their replacements with safer alternatives.


It is known that some traditional chemical burning rate deterrents and other such behavior modifiers long used in small arms propellants are deemed to be in the dangerous category, so many long established powders are now living on borrowed time. A little commented on element of the blurb about the new IMR Enduron powders is that they are 'environmentally friendly'. It actually goes a bit further than that as many existing powders will not be allowed to be sold in EC countries in a very few years time, nor will ammunition loaded with them. General Dynamics / IMR is getting itself geared up to this challenge with its new products. Once the new regulations start to apply no older long established IMR grades will be compliant, that also applying to many other makes. I don't know how this affects many existing European manufacturers other than Nitrochemie whose powders are already compliant, but I wouldn't be at all surprised if this doesn't sound the death knell for some as there is substantially more capacity than demand for powders, given the lack of wartime requirements, but western governments have long since stopped worrying about that.

So far at any rate, there seems to be no US equivalent to REACH in this field, so many older propellants will continue to be sold in this market, likewise loaded ammunition.
Every two months Handloader magazine reviews another powder. I have been reading this magazine for years, and found it interesting how many powders are imported. I have researched this a lot myself and you are spot on JD. I had a friend that worked at the Dupont powder plant in Tacoma, WA before the EPA regulations shut them down. I think that was in 1975. Good information JD. Thanks
 
Some stuff that might be true:

Huge explosions have occurred during the manufacturing of extruded powders during the drying stage where tons of powder were undergoing this stage of manufacturing for war time demands. Entire factories were destroyed and many workers killed.

Tons of extruded powder were remanufactured into ball powder at the end of WWII. Possibly, H380 is an example being brewed for .30-06 ammo.

I believe nitric acid is used to dissolve the cellulose making nitro-cellulose.

As far as I know, no extruded powders are made in the USA - just ball powders at St. Marks, FL. - 4000MR to W760 and whatever.

During manufacturing, unconfined extruded powder lots have exploded vs. combustion - this is not usual but may occur under some situations.
 
I wish a U.S. based company would tool up and start producing powder. We already have some of the best primers, brass, and bullet manufacturers in the U.S. not to mention the custom barrels, actions, and stock makers. I think it would be really beneficial and would help with any supply chain issues.
 
Last edited:
I wish a US based company would tool up and start producing powder. We already have some of the best primers, brass, and bullet manufacturers in the US not to mention the custom barrels, actions, and stock makers. I think it would be really beneficial and would help with any supply chain issues.
I think most of ''US" long for any U.S.-made product and stop dependency on other countries.
 
Top