These rifles are built by me. I built them while working for Nate at Straight Shot Gunsmithing. I must sale them quickly.
#1
300 RUM!
Beautifully trued Rem 700, m16 extractor, tactical bolt knob, nicely tuned 2lb factory trigger, Brux 28" 1 in 9.6 palma contour, Wyatts extended mag box, Joel Russo laminate stock, and an SSG extreme brake. This one turned out perfect! It is gorgeous, and a real hammer!! I would like $2500 but she WILL go this week. This is a superb custom without the 8-12 month wait!
A photo of the action too:
#2
7mm WSM
Trued model 70CRF, used match barrel with new chamber and new crown #5 contour 1 in 9, sweetly tuned 2lb factory trigger, Boyds thumbhole stock, and an SSG V port brake.
This is a sweet handling rifle with a lot of reach.
and the action:
#3
260 REM
This one is a tack driving, trued CZ 550, has the CZ set trigger, used Broughton 5C with new chamber and crown 28" 1 in 8 twist #5 contour.
and the action:
I am not sure what to ask for 2 & 3 due to the used barrels. Both of these barrels were retired early due to poor chambering jobs. I don't know round counts, but was led to believe they are both low. They are completely rechambered and recrowned. I test fired both rifles for accuracy. The 7wsm shot .5 and the 260 shot well under .5. Like the 300 RUM, I need to sale these this week. Please don't be shy with offers or questions! This is an opportunity to get a superb rifle at a huge disount, with zero wait!
All the work on these rifles was done by me. I quarantee all three rifles will shoot at or under half minute. I will allow any reputable member three days to examine and shoot these rifles. I would do more but I am pressed for time.
Nate at Straight Shot Gunsmithing offered to comment on these rifles for me. I would be grateful if you would keep your questions about these rifles in this thread, and not bombard a busy friend with questions.
Thanks for looking!!
#1
300 RUM!
Beautifully trued Rem 700, m16 extractor, tactical bolt knob, nicely tuned 2lb factory trigger, Brux 28" 1 in 9.6 palma contour, Wyatts extended mag box, Joel Russo laminate stock, and an SSG extreme brake. This one turned out perfect! It is gorgeous, and a real hammer!! I would like $2500 but she WILL go this week. This is a superb custom without the 8-12 month wait!
A photo of the action too:
#2
7mm WSM
Trued model 70CRF, used match barrel with new chamber and new crown #5 contour 1 in 9, sweetly tuned 2lb factory trigger, Boyds thumbhole stock, and an SSG V port brake.
This is a sweet handling rifle with a lot of reach.
and the action:
#3
260 REM
This one is a tack driving, trued CZ 550, has the CZ set trigger, used Broughton 5C with new chamber and crown 28" 1 in 8 twist #5 contour.
and the action:
I am not sure what to ask for 2 & 3 due to the used barrels. Both of these barrels were retired early due to poor chambering jobs. I don't know round counts, but was led to believe they are both low. They are completely rechambered and recrowned. I test fired both rifles for accuracy. The 7wsm shot .5 and the 260 shot well under .5. Like the 300 RUM, I need to sale these this week. Please don't be shy with offers or questions! This is an opportunity to get a superb rifle at a huge disount, with zero wait!
All the work on these rifles was done by me. I quarantee all three rifles will shoot at or under half minute. I will allow any reputable member three days to examine and shoot these rifles. I would do more but I am pressed for time.
Nate at Straight Shot Gunsmithing offered to comment on these rifles for me. I would be grateful if you would keep your questions about these rifles in this thread, and not bombard a busy friend with questions.
Thanks for looking!!