Sponge painting stocks?

[Rem6br]

here's a couple i done last year. the Christensen Ridgeline 280 Ackley got stolen so if anyone happens across it i'd really appreciate the info on it.

 

[HunterMann]

Air dry cerakote using sea sponge from lowes over sprayed cerakote. Clear flat over all of it to even out the differences in sheen View attachment 280658

Looks great! But I am curious about the angle of the front sling point and apparently no rear sling point of attachment...

 

[VTbluegrass]

I used an entire can of synthetic safe gun scrubber when I painted my ancient 270. Clean once scrubbing every nook, clean again. The rest will be fine if you get the first step right.

I did a satin black on the metal which looks way way better than I was expecting and standard woodland colors on the stock. Both are holding up great after 2 seasons. Pics got lost on phone but I did base coat of tan and started taping on oak leaves, then finished with a few touches of each color shot through a laundry bag holding the can further back to soften the edges. Flat Krylon clear coat to finish.

 

[no1cr500racer]

I used some leaves from plants around my house and used them as a stencil and sprayed over them with different colors to get a leafy camo look.

 

[N.Scott Nail]

#1 CR500 Racer......... that looks really good!! I couldn't make yur AR out til I looked at larger picture, Great color scheme!! 75w/Dist36

 

[skipglo]

Hey Skip,

I bet it looks real good with them Christmas lights too while nighttime predator hunts.

Best, JGS

Nice catch.... LMAO...so I was bored before Christmas.....geeeeez

 

[skipglo]

Krylon, I have found the best sponge to be the big "airy" sea sponges from Michael's. I finish with Brownell's Alumahyde. I definitely think less is more, as you can see on the last one, I got a little carried away.

View attachment 280917View attachment 280918View attachment 280919View attachment 280921View attachment 280922

Very nice! Well done!

 

[J.T.B. 338]

I've painted quite a few. Used multiple kinds of paint's over the years. I actually like the rustoleum cammo paint cans then use a matt clear coat to finish it off. Have had guns with the paint on them for years and has been extremely durable with heavy use. Just be sure paint/clear has cured completely or you'll be able to scratch it. Once cured, I've had no issues.

 

[lancetkenyon]

Not sponge, but all of these are Krylon jobs with matte clear overcoats (except on my AR). MURICA!

 

[Ranger Rick]

Air dry cerakote using sea sponge from lowes over sprayed cerakote. Clear flat over all of it to even out the differences in sheen View attachment 280658

Great job buddy. Your work/hobby looks like the 4-color, $400+ professional Cerakoting work.
Am I correct Idahohunter_1?

 

[fireman72]

I've done a few. With some history painting other polymer stocks, I use the Krylon Fusion, when possible, as it seems to adhere better than most, as some others have mentioned earlier.

My takes on some of the Altus/Manners color schemes on a couple of KRG Bravo stocks and a Boyd's PV. Stock base colors with torn pieces of Walmart bath sponges torn into random chunks and dipped into puddles of sprayed Krylon. Light color first, followed by darker color. No clear coat needed, to date. Obviously, colors can be varied and additional colors could be included. Less is more when sponge painting, imho.

 

[skipglo]

I've done a few. With some history painting other polymer stocks, I use the Krylon Fusion, when possible, as it seems to adhere better than most, as some others have mentioned earlier.

My takes on some of the Altus/Manners color schemes on a couple of KRG Bravo stocks and a Boyd's PV. Stock base colors with torn pieces of Walmart bath sponges torn into random chunks and dipped into puddles of sprayed Krylon. Light color first, followed by darker color. No clear coat needed, to date. Obviously, colors can be varied and additional colors could be included. Less is more when sponge painting, imho.

Well done!