Powder choice for 25-06

[ButterBean]

IMR4350, W760 in that order

 

[ButterBean]

I know you didn't mention it but if you can get some H4831SC or regular H4831 try it too. It works very good in my 25/06 from 75gr to 115 gr bullets. Not shooting Hammer bullets but Nosler, Sierra, and Hornady .

Will be to slow with the Hammers

 

[BigDon]

IMR4350, W760 in that order

I have total respect for your opinion - So why IMR vs H, which appears to be more temp stable?

 

[ButterBean]

I have total respect for your opinion - So why IMR vs H, which appears to be more temp stable?

The OP doesn't have any H4350, If he had that and Varget would be my top 2 suggestions

 

[WYOHTF]

The OP doesn't have any H4350, If he had that and Varget would be my top 2 suggestions

With your A.I. experience, would powder choices change

 

[ButterBean]

H4350 with the AI and the 90 and 92's

 

[imartin]

Birddog, where are you at in PA? I'm in the Southeast. If you need anything for the 25-06, just give me a shout.

 

[birddog 68]

Birddog, where are you at in PA? I'm in the Southeast. If you need anything for the 25-06, just give me a shout.
I'm in western Pa. Thanks

 

[birddog 68]

IMR4350, W760 in that order

Nice to see a W760 post. I thought I may have been out of bounds since nobody has mentioned it.

 

[ButterBean]

Nice to see a W760 post. I thought I may have been out of bounds since nobody has mentioned it.

I'ts an overlooked powder that works great in a bunch of stuff, We pushed the 124 Hammers out of a 300 WSM@ 3832 with it

 

[birddog 68]

I'ts an overlooked powder that works great in a bunch of stuff, We pushed the 124 Hammers out of a 300 WSM@ 3832 with it

I know my 7-08 loves W760,from 120 grain BT up to 140 Bergers. I was worried about not being able to get good case capacity with it in the 25-06

 

[ButterBean]

I know my 7-08 loves W760,from 120 grain BT up to 140 Bergers. I was worried about not being able to get good case capacity with it in the 25-06

I think you'll be ok

 

[imartin]

Of the powders you have listed I would be trying 4831 and 4350 first. If available I would use Hodgdon H4831 and H4350.

 

[ButterBean]

Of the powders you have listed I would be trying 4831 and 4350 first. If available I would use Hodgdon H4831 and H4350.

The H4831 will be too slow