lever-hed,
Here is some load data from my earlier loadings with 110gn AB;
IMR4350/CCI BR2/2.7930"OAL Note: Velocities are average from 3-shots.
48.0 = 3009fps @ .4345"
48.5 = 3021fps @ .4870"
49.0 = 3029fps @ .6555"
49.5 = 3115fps @ .7490"
IMR4831/CCI BR2/2.7930"OAL
51.0 = 3143fps @ 1.041"
51.5 = 3136fps @ .7205"
52.0 = 3175fps @ .8595"
52.5 = 3214fps @ 1.327"
RL22/9.5M/2.7930"OAL
53.0 = 3181fps @ .8435"
53.5 = 3218fps @ .7570"
54.0 = 3242fps @ 1.136" (may have been me?)
54.5 = 3271fps @ .6690" (figured this as max, but saw no pressure signs)
3 days later I tried;
RL22/9.5M/2.7930"OAL
54.5 = 3271fps @ .6965" (velocity averaged same and accuracy was very close!)
55.0 = 3302fps @ 1.070"
115gn Berger VLD/RL22/9.5M/2.7730"OAL
50.0 = 2951fps @ .387"
50.5 = 3004fps @ .757"
51.0 = 3044fps @ .390"
51.5 = 3062fps @ 1.0385"
I haven't bought any AccuBonds since 2005, and I loaded all the Bergers I had at the time @ 51.0gn of RL22.
117gn Sierra BTSP/RL22/9.5M/2.7985"OAL
51.0 = .7630" (no velocity)
51.5 = .8830" (no velocity)
52.0 = .4790" @ 3050fps (again, 3-shot average from 3051/3053/3046)
115gn NBT/RL22/9.5M/2.7770"OAL
51.0 = 2975fps @ .4075"
51.5 = 3063fps @ .8520"
52.0 = 3067fps @ .4095"
52.5 = 3071fps @ 1.3875"
Notice the similarities of 52.0gn with both the BTSP and the Ballistic Tip.
Hope this info gets you started in the right direction(s). Good shooting! JohnnyK.