Grandsons new CA Carbon barrel build

dgarrett

Well-Known Member
Joined
Dec 2, 2012
Messages
413
Has anyone used ADG brass in the 300 win yet???? How many grains of powder less the Winchester brass???? I am wanting to start load work up with the 168 gr Bergers... Any help as a starting place with ADG brass would be helpfull... Dave
 

jpfrog

Well-Known Member
LRH Team Member
Joined
Mar 19, 2011
Messages
632
Location
TX
Has anyone used ADG brass in the 300 win yet???? How many grains of powder less the Winchester brass???? I am wanting to start load work up with the 168 gr Bergers... Any help as a starting place with ADG brass would be helpfull... Dave
I don't have experience comparing them to Winchester brass, but I was able to use the identical load with ADG .300wm brass that I had previously been using in my Nosler brass, with velocities within 5 fps of what I was getting with the Nosler brass and no change in group size. I was very impressed...only have a couple firings on the brass so far though.
 

dgarrett

Well-Known Member
Joined
Dec 2, 2012
Messages
413
Thank for your help.... I can't remember where i read it but I thought ADG was similar in case size to the RWS and took a few grains less.... But never read any real load data on it before... Again thanks for your help... Dave
 

dgarrett

Well-Known Member
Joined
Dec 2, 2012
Messages
413
I don't know but can ask the gunsmith when I I receive the stock and take it to him... Dave
 

Trending threads

Top