goodgrouper
Well-Known Member
Thought you fellow 6br guys would appreciate this. I was fireforming some brass for a 6br improved today with 105 grain Lapua Scenars using 26 grains of IMR3031. The
bullets were jumping to the rifling about .125" and were only going 2600 fps. Sd was 10 fps. There were no wind flags and the bench used was a throwaway range bench made from rickety old planks from the Santa Maria. My target board was blowing around in the 10 mph wind and I really didn't concentrate to shoot this group. I didn't even level my rest or table top!
There are 33 shots total in this group but three flew out to the sides making it 30 shots that can be covered with a dime at 100 yards! This baby shoots.
Equip: Bat MB action, Jewell 2 oz. trigger, Leupy 8.5-25 LRT, Edge HBR stock, 30" Krieger 4 groove barrel with an 8" twist and Vais brake.
Gotta love those 6mm br's! /ubbthreads/images/graemlins/grin.gif
bullets were jumping to the rifling about .125" and were only going 2600 fps. Sd was 10 fps. There were no wind flags and the bench used was a throwaway range bench made from rickety old planks from the Santa Maria. My target board was blowing around in the 10 mph wind and I really didn't concentrate to shoot this group. I didn't even level my rest or table top!
There are 33 shots total in this group but three flew out to the sides making it 30 shots that can be covered with a dime at 100 yards! This baby shoots.
Equip: Bat MB action, Jewell 2 oz. trigger, Leupy 8.5-25 LRT, Edge HBR stock, 30" Krieger 4 groove barrel with an 8" twist and Vais brake.
Gotta love those 6mm br's! /ubbthreads/images/graemlins/grin.gif