fremont
Well-Known Member
I've seen quite a bit on barrel length and twist, but nothing on a recommended Bartlein contour for the 300 PRC. Anyone had a Bartlein built for theirs?
Was thinking that too but had a friend do a 6.5 PRC with Bartlein and he said they told him no less than a #4.even a 3b in a Bartlein is a good compromise for carry or distance
Again, it depends on the purpose. For a carry rifle, a 3b would be plenty.Was thinking that too but had a friend do a 6.5 PRC with Bartlein and he said they told him no less than a #4.
I've seen quite a bit on barrel length and twist, but nothing on a recommended Bartlein contour for the 300 PRC. Anyone had a Bartlein built for theirs?
Senderos crown at .830" normally.going with a hawk hill on 300 PRC and a 3B light sporter. End of barrel is .700 ths which is on the Sendero line thickness.
Went with 26 inch. My bucket list gun, it should be a shooter. have you decided on the bullets you going or if you are going to get a reamer made?
First 210 VLDH, 212 ELDx, 210 LRAB. Maybe then try 225 ELDx but haven't been excited with the word around Hornady terminal performance--but dead is dead.have you decided on the bullets you going or if you are going to get a reamer made
10/4. Thought it was basically a crown of a Remington 300 win Chester which was .670. Guess it's just a little biggerSenderos crown at .830" normally.
10/4. I'm tore between the 210 LRAB or the 215 Berger. More than likely going with the Berger.First 210 VLDH, 212 ELDx, 210 LRAB. Maybe then try 225 ELDx but haven't been excited with the word around Hornady terminal performance--but dead is dead.
Using SAAMI minimum reamer.
Depends on what your game is but a Sendero is heavy enough for good long range work or even a 3b in a Bartlein is a good compromise for carry or distance.
actually a Bart 3b is a #5 in most others.yep and remember a Bartlein is usually 1 size bigger than others, i.e. a Bartlein 4 = a Brux or Rock 5